How much time to install these?
Next question for those who have used these-- are these something that you buy prior to going to the alignment shop and getting everything done or should you just install the factory style units and get them if you need them. What I am thinking is to get them to be able to max out the the caster regardless of the number. I am guessing you would want to get the ones you need after you get the alignment.
On the SPC website they say a half hour for install.
Tim, what are your caster specs, with the 2 1/2" coils and 7* bushings?
SPC and the NAPA bushings are the same thing and both install the same way.
Tim
Are they really the same? I got the Moog (Part number K936) and they look just like the photo on the NAPA site. But they sure don't look like the drawing on the SPC instructions. The SPC appear to be one piece and the Moog/NAPA are two pieces.
Tim, that's pretty much the same story with mine. It drives so nice on the highway, I never felt it was necessary to take it to a shop. I will get the specs on what it is now, before I cut and turn the yokes.
Are they really the same? I got the Moog (Part number K936) and they look just like the photo on the NAPA site. But they sure don't look like the drawing on the SPC instructions. The SPC appear to be one piece and the Moog/NAPA are two pieces.
I'm going off the link garberz posted up top (http://www.spcalignment.com/index.ph...&pid=23012) and what I've seen and held in my hands at NAPA. A ball joint incert is a ball joint incert just some are tapered and others aren't. New ball joints come with the non tapered incerts.
Post a link to what you're seeing? 2 piece? must be an apples and oranges thing.....lol
Tim






