• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Camber and caster measurements

turbotim2

Contributor
____________
Joined
Jun 26, 2003
Messages
2,158
Assuming I did it correctly, these are what I got:
Right:
Camber = +2*
Caster = -0.5*

Left:
Camber = +1*
Caster = -1*

This is with a D44, 3.5" lift, 7* bushings. What should I be shooting for?

Thanks!
 

broncodriver99

Bronco Guru
Joined
Jan 27, 2008
Messages
4,780
Loc.
Glen Allen, VA
I aimed for about .5* positive camber but 1* is acceptable. You do need to get your caster numbers up though. 2+* is a minimum for decent road manners. Closer to 4-5* is better.
 

B RON CO

Contributor
Bronco Guru
Joined
Jun 29, 2016
Messages
2,484
Loc.
Statesville, NC
Hi, you should have over 3* positive caster. Negative caster is bad. What is the toe in and how does it feel on he road? Good luck
 

SHX669

Bronco Guru
Joined
Jan 9, 2009
Messages
1,997
With 7* bushings and a 2 1/2" lift I've got 3 * and 3.4 * Caster . I've wondered if somewhere in production the specs for the wedges got lost and Ford/Dana were going by memory - LOL
 
Top