• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

What have you done to your Bronco today?

asinor

Bronco Guru
Joined
May 13, 2011
Messages
1,396
Loc.
Tulsa, OK
What happened was: Ford is stupid.
  • Let's make the timing cover part of the cooling path, you know so most people can't change the water pump gaskets without taking the motor apart.
  • Ohhh, while were at it, let's make it out of aluminum, then use a copper radiator.
  • Now let's immerse them both in an electrolyte.
  • Just for good measure, let's pass an electrical current through it by making it the ground in the charging path.
The result? Aluminum parts corroded from the inside so badly they cannot hold pressure. So ends today's practical chemistry lesson in how to promote galvanic corrosion.
 

Attachments

  • temp_4_temp_taken_picture.jpg
    temp_4_temp_taken_picture.jpg
    90.9 KB · Views: 79

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
Looks good, you can come paint mine too!

I'm on it.. :)

What happened was: Ford is stupid.
  • Let's make the timing cover part of the cooling path, you know so most people can't change the water pump gaskets without taking the motor apart.
  • Ohhh, while were at it, let's make it out of aluminum, then use a copper radiator.
  • Now let's immerse them both in an electrolyte.
  • Just for good measure, let's pass an electrical current through it by making it the ground in the charging path.
The result? Aluminum parts corroded from the inside so badly they cannot hold pressure. So ends today's practical chemistry lesson in how to promote galvanic corrosion.

Always something right brother...
 

Tedster100

Chairman of the Bored
Joined
Aug 25, 2010
Messages
1,762
Hangin out with the neighbors last night & we decided wings sounded good for dinner. Of course I volunteered to go get them, any chance to take a ride! So I get to the bar, pay for the order and the cute little 20 something bar maid in a sun dress asks if I'd like help to the car with 5 big bags with the to-go order. I say sure, why not. Long story short, she LOVED the Bronco, was crawling all over it! Said she never saw one like this but she never even came close to calling it a Jeep! I think she would have asked for a ride if she wasn't working. Cool to see folks get excited about the old Broncos! Bronco got some attention and I got wings = good day!

I, know...I need to start taking pictures of these things. It would have made this post sooo much better.
 

asinor

Bronco Guru
Joined
May 13, 2011
Messages
1,396
Loc.
Tulsa, OK
New Timing chain and gears. Got it apart and they were shot. I seriously cannot believe no one had a double roller for a SBF locally.
New Timing cover. The original problem.
New water pump. Its already apart, its a little corroded, might as well.

I am severely disappointed with the absence of parts at local auto parts stores.
List of items not available locally (this is just from the last 3 weeks):
U-Joints made by Spicer
SBF High Flow water pump
SBF Double roller timing chain
Steering u-joints
SBF Cam cover

Ford dealer can't even look up parts for anything older than 10 yrs old.
 
Last edited:

moosebob

Jr. Member
Joined
Mar 11, 2010
Messages
51
Not a damn thing!

I have been working in Shanghai China since January 1. Boy do I miss driving
the 69' and working on the 70'

Hopefully will get some down time in October to come home for a few weeks!
 

Attachments

  • IMG_0565.jpg
    IMG_0565.jpg
    99 KB · Views: 53
  • 2012-09-02 13.30.33.jpg
    2012-09-02 13.30.33.jpg
    142.6 KB · Views: 53
  • 2012-10-14 16.45.29.jpg
    2012-10-14 16.45.29.jpg
    140.4 KB · Views: 49

vesparex

Full Member
Joined
Feb 3, 2012
Messages
347
Well, over last weekend I finished the Centech wiring harness installation! And tonite I installed a set of un-tinted sliding rear side windows! :)

The engine bay portion of the harness:
null_zps22a6ff88.jpg


The sliding rear windows:
null_zpsa1a39be2.jpg


Duane
 

broncokak

Bronco Guru
Joined
Jun 13, 2006
Messages
3,970
Cut off the old dented rocker in preparation for new sliders.
 

Attachments

  • uploadfromtaptalk1377807489827.jpg
    uploadfromtaptalk1377807489827.jpg
    38.7 KB · Views: 67
  • uploadfromtaptalk1377807506332.jpg
    uploadfromtaptalk1377807506332.jpg
    40.1 KB · Views: 70
  • uploadfromtaptalk1377807538466.jpg
    uploadfromtaptalk1377807538466.jpg
    38.4 KB · Views: 64

broncokak

Bronco Guru
Joined
Jun 13, 2006
Messages
3,970
Thanks,
its getting there Randy. It should make it look a lot cleaner without the dents below the door. Would love to do stainless...figure about $800 for the tubes alone! :eek: I can buy a lot of rattle cans for that amount. ;D
 

miikee73

Shadetree Guru
Joined
Dec 14, 2010
Messages
3,551
Loc.
Aloha
Nice,what happened with the BC top. Missed you at Unevent

sent from my fart smone using crap talk
 
Top