• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Half Cab Question

bbronko

Jr. Member
Joined
Jan 29, 2005
Messages
55
Hello Everyone,

I have been looking at the half cabs for a while now. Has anyone made the swap to a half cab and kick themselves for doing it? I am 6'1" and was wondering if the stock bucket seats will go back all the way in a half cab. Any other thing I might be forgetting about please let me know. I would hate to spend all the money to get one and then find out a problem that would make it not usable for me.

Thank you
 

Explorer

Bronco Guru
Joined
Mar 2, 2008
Messages
4,390
Loc.
Raphine, Virginia
I won't lie to you, half cabs just are not made for people with long legs. I'm using 89 Ranger seats that fit against the bulkhead/window perfectly and only 5"10 175 lbs. While it fit's me perfectly, anyone taller is uncomfortable driving it.
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
It's true, there isn't much room....sigh....
I love the half cabs but I don't fit in them very well.
I'm 6'5" and 240 lbs.
 

Pearlcoat

Bronco Guru
Joined
Feb 17, 2008
Messages
1,294
We just bought a half cab last month, which is actually a U15 converted to a hc by a previous owner. Never looked at them because my husband is 6'3" and 225 lbs, figured he would not fit. But this was from a great bronco guy and we couldn't pass it up. He actually fits pretty nicely, says he's comfortable driving. Its a 3 sp and when he uses the clutch his knee is close to the steering wheel. Try to find someone who has one and ask them to let you sit in it.

Ours has a custom bed cover which is pretty cool because we can carry something in there and not worry about rain or wind.
 

Attachments

  • close up.JPG
    close up.JPG
    130.2 KB · Views: 110

Explorer

Bronco Guru
Joined
Mar 2, 2008
Messages
4,390
Loc.
Raphine, Virginia
Good advise from Pearlcoat. Even people the same height are built different. Long legs or long in the torso. Modifications "can" be made, though somewhat limited with a halfcab. I know people that have had to lower the seat and reposition the seat backwards even on a full cab.
 

fordfan

Bronco Guru
Joined
Sep 13, 2009
Messages
3,592
The seats in the halfcab effect leg room a lot. Some of the aftermarket "racing" style seats with the high back really don't work in the halfcab. Even the stock buckets don't allow as much room as the bench seat that was originally in most halfcabs.

My trail/woods Bronco halfcab has some '70's Ford buckets that I think were originally in a van work great. I'm 6'-2" and they are very comfortable in the confines of the halfcab.

I will try to get better pics of the seats and post them; The seats are a thin profile high back bucket that fits the bulkhead also perfectly.
 

Attachments

  • 100_2265.jpg
    100_2265.jpg
    96.5 KB · Views: 107
  • 100_2956.jpg
    100_2956.jpg
    174.9 KB · Views: 126
  • 100_3212.jpg
    100_3212.jpg
    97 KB · Views: 129

maggard12

Full Member
Joined
Jan 7, 2007
Messages
286
Loc.
Whitesburg, Ky
i always loved half cabs and they were actually the reason i bought a bronco. after having one, i dont think i will get another one. There is not enough room even though i am short and in my experience, they were HOT!!!!!! no air movement in mine whatsoever but mine could be the exception.
 

BRONCROB

Bronco Guru
Joined
Nov 24, 2010
Messages
1,613
Loc.
WISNER LA.
You can always just shorten a full top.I just did mine and I moved my bulkhead back two inches.Works pretty well so far.
 

Attachments

  • IMG_20131105_150824.jpg
    IMG_20131105_150824.jpg
    80.2 KB · Views: 126

Timmy390

Contributor
Bronco Guru
Joined
Jan 1, 2011
Messages
5,948
Loc.
Conway, AR
Hello Everyone,

I have been looking at the half cabs for a while now. Has anyone made the swap to a half cab and kick themselves for doing it? I am 6'1" and was wondering if the stock bucket seats will go back all the way in a half cab. Any other thing I might be forgetting about please let me know. I would hate to spend all the money to get one and then find out a problem that would make it not usable for me.

Thank you

I'm 6' and have no isses in my HC. It really depends on how you like to drive. If you like to drive all laid back practiclly in the back seat of your DD, then no stock Bronco is going to fit you. You would need to modify the seat/tracks/mounting to be conforable.

I guess I'm trying to say driving positions and confort is different for each person. I drive like you see most racecar drivers, knees elbows and steering wheel all in a 3x3 foot box with my butt low and sligtly forward if the seat will allow (90 Mustang GT had everythign perfect to do this).

The only thing I dislike about the Bronco HC of FC is at 6' I have to duck my head just a bit to see fully out the windshield. If I don't duck jsut a bit, I'm looking at the windshield frame.

Tim
 
OP
OP
B

bbronko

Jr. Member
Joined
Jan 29, 2005
Messages
55
Thank You Everyone for all the help. Yes I have to find a local half cab Bronco so I can sit in it and see. I have two broncos now but one is a wagon and the other is a soft top. I really like all the bronco pics. Thanks
 

slim811

Sr. Member
Joined
Mar 6, 2013
Messages
709
I like your half cab modification.

You can always just shorten a full top.I just did mine and I moved my bulkhead back two inches.Works pretty well so far.

Nice Job! I was wondering if you can post some more pixs? Interested on inside of the half cab and did you also make a bulkhead to fit. Thanks Slim
 

Wyflyer

Bronco Guru
Joined
Apr 1, 2008
Messages
2,920
I have trouble seeing out of all of them, like they said I have to bend my head to see below the top of the windshield. I've considered chopping the floor pans under the driver's seat.
 

fordfan

Bronco Guru
Joined
Sep 13, 2009
Messages
3,592
I have trouble seeing out of all of them, like they said I have to bend my head to see below the top of the windshield. I've considered chopping the floor pans under the driver's seat.

Just lift the Bronco a little more... The higher your Bronco sits, the easier it is to see under the windshield frame! LOL!
 
Top