• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Solenoid getting too hot?

Lunar-tic

Sr. Member
Joined
Sep 28, 2009
Messages
629
Loc.
Brentsville
I think my starter solenoid is malfunctioning when the under hood temps go up, like when I am waiting in a long line to get gas. Saturday I was sitting in line at the gas pumps for about 15 minutes with the engine idling and when I shut it off to fuel up it wouldn't restart. It has done this before, but usually I can click the key a few times and get it to start after a few tries. This time I had to wait about 20 minutes with the hood up before it would start. It is mounted on the inner fender about 6-8 inches from the headers. When it is cool or cold it fires right up, no issues. If it is the heat, would a new solenoid fix the problem or should I craft a heat shield? Thanks for the help.
 

mini73

Sr. Member
Joined
Aug 12, 2013
Messages
969
I have seen on here where this might be a starter problem. I'm having the same problem. Maybe the starter is getting to hot? This is what I'm thinking and maybe i will just get a new mini high torque starter to replace my original factory starter. Let us know what you find out in any case.
 
Last edited:

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
I've never seen the starter solenoid operation affected by heat. It's simply a set of copper contacts, after all. The contact areas eventually get pitted and beat up over time and will become erratic in function, but I can't see how heat would make that worse.

Don't leave the starter cable out of the mix either...failing cables can be affected by heat.

One thing is certain though...the solenoid is cheap and easy to replace, relative to the starter, so nothing hurt in trying that first.;)
 

mini73

Sr. Member
Joined
Aug 12, 2013
Messages
969
I've never seen the starter solenoid operation affected by heat. It's simply a set of copper contacts, after all. The contact areas eventually get pitted and beat up over time and will become erratic in function, but I can't see how heat would make that worse.

Don't leave the starter cable out of the mix either...failing cables can be affected by heat.

One thing is certain though...the solenoid is cheap and easy to replace, relative to the starter, so nothing hurt in trying that first.;)



X2. I've already cleaned up my starter cable and contact point for it, changed the solenoid and was one of the first things I replaced when I bought my bronco. I have always thought work from the easiest to the hardest when troubleshooting things.
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
Carry a hammer with you and next time you have this issue give the starter a wack with the hammer on the heavy part of the steel case. If its a brush hanging up when hot this will normally free it and the motor will turn. Dont beat on the starter a whack or 2 normally does it. If the wack works, time to deal with the starter. Clean it up and get new brushes or replace the starter before you really get stuck and need a $100 tow.
 
OP
OP
Lunar-tic

Lunar-tic

Sr. Member
Joined
Sep 28, 2009
Messages
629
Loc.
Brentsville
Well, the starter is relatively new, but it is also a cheap one. Probably from China via Auto Zone. I jumped the solenoid and got it to turn over, but it was sluggish. I just assumed it was because of the way I jumped it. I would rather have a mini high torque starter anyhow, any suggestions on those?
 

69red

Full Member
Joined
Dec 17, 2004
Messages
239
Loc.
Cochrane, AB,CAN
any suggestions on those?

i got mine for about $15 at pick and pull from a 1994 f150. I think most mid-90's 5.0L have the right ones. you need to match tranny type. if you have an auto you need to get the starter from an auto, manual from a manual, otherwise it wont work.

its an easy, awesome upgrade ;D.
 

patterdale

Bronco Guru
Joined
May 24, 2010
Messages
1,252
Solenoid not likely. Starter yes. Cable probable or a combination of starter and cable. The ends being clean are a start. If there is a bunch of whitish/greenish powder in the cable it is failing sooner than later. The cables can fail inside away from the very end. I've had it happen to me a couple of times and helped people with this problem numerous times. When temperature goes up so does resistance in the windings and cables especially if the cables are failing up inside the casing. It can also be a dead spot or dirty armature in the starter. Click the key enough time and you can coax enough current through to make it turn over. Eventually it will just give up.
 

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
If it's a rebuilt original it may have a mismatched armature. I had the same symptoms with a rebuilt starter and checked everything but couldn't find the problem. The starter and alternator shop listened to my problem and immediately told me what was wrong. Some Ford starters had a slightly larger diameter armature than others. When they get hot they expand enough that, they bind up in the field coil. Take it to a real alternator shop they can check it out in a few seconds. Mass rebuilders aren't very careful in assembling these things, plus the difference is too small to see. If this isn't the problem you'll know if your starter is OK.
 
OP
OP
Lunar-tic

Lunar-tic

Sr. Member
Joined
Sep 28, 2009
Messages
629
Loc.
Brentsville
That makes the most sense, it is a cheap rebuilt part. It starts fine when it is cold and only really struggles when it is hot. I'll look into replacing it with a better quality part. Thanks for the help, I will post the solution when I figure it out.
 

Justafordguy

Bronco Guru
Joined
Sep 26, 2009
Messages
6,255
The mini high torque starters are awesome. They also fit way better with hedders because of the snall case. They use less battery power too. Great upgrade.
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
My eb had sat for a month or longer. When I went to crank it up it would only turn over rather slowly. But it was still turning over fine just slowly. It eventually fired up. I ran it for a second then shut it off to hook up the battery tender.
The voltage was down to 9.6.
The only reason it kept turning over and eventually cranked up is my mini pmgr starter. With the old school unit it would have just clicked.
So definitely get yourself a mini starter. Even if it is a rebuilt unit from Auto zone it is still far superior to the stock style starter.
$89 bucks at Auto zone. Got mine by asking for a starter for a '94 Mustang with a 5.0 and an automatic.
BC has a nice schematic for how you wire it up on their site.
One of the more logical upgrades.
 

nate213

Jr. Member
Joined
Mar 13, 2012
Messages
69
Loc.
West jordan, Utah
i had the exact same problem with my 66. it was an issue with my starter solenoid. i just moved it farther from the original spot by the headers. free fix, problem solved.
 
OP
OP
Lunar-tic

Lunar-tic

Sr. Member
Joined
Sep 28, 2009
Messages
629
Loc.
Brentsville
Update: I finally bought a JBG high torque, mini starter. Head and shoulders above the stock type (not that you all didn't already know that). That thing starts it right up even after it sits for a week or more. I wired it up according to the directions on this forum. So why wouldn't JBG put those directions in the box with the starter and why do they send it out with that jumper wire preinstalled?

Thanks again for all the help
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Glad it's updated and starting better! I think it's a great upgrade too.
A question is though, does your original starter relay mount to the wheel well directly facing the headers? Or is it mounted between the battery and fender, on the front face of the wheel well?
Even though, like the others have said, it's less likely to be a starter relay vs the starter or the cable, when they're mounted this way (like they are on many of the very early model EB's, heat is higher than on later models.
I would think that can have some mild effect then, especially on an older unit.


I wired it up according to the directions on this forum. So why wouldn't JBG put those directions in the box with the starter and why do they send it out with that jumper wire preinstalled?

Haven't seen the jumper wire you mention, but if it's the same as the one we now send ours out with, it's probably because they don't intend for you to wire it like the instructions say online. Instead they want you to simply wire it like they intended, with the original main starter cable from your fender-mounted relay directly to the large stud on the starter solenoid. No more changing of the position of that cable on the fender-mounted relay. Just leave it as is, and install the new starter.

That's only a guess however, as I have not seen their setup. But ours now includes a very short jumper between the large post and the small post on the starter-mounted solenoid.
Not for any particular performance change. More just to make it easier to wire for those that don't get online like here, and didn't understand the previous instructions that have you move the starter cable to the battery side of the relay, and put the new jumper wire between the relay and small post of the solenoid.
Saves time and wire.

Paul
 
OP
OP
Lunar-tic

Lunar-tic

Sr. Member
Joined
Sep 28, 2009
Messages
629
Loc.
Brentsville
Another update and thanks Paul, looks like the problem is the relay and it is mounted on the inner fender facing the headers. After driving it in traffic for about an hour last week it didn't want to start (same old symptoms). I ordered a new relay and will try to move it to the battery side of the fender. Thanks again for all the input.
 

mini73

Sr. Member
Joined
Aug 12, 2013
Messages
969
Another update and thanks Paul, looks like the problem is the relay and it is mounted on the inner fender facing the headers. After driving it in traffic for about an hour last week it didn't want to start (same old symptoms). I ordered a new relay and will try to move it to the battery side of the fender. Thanks again for all the input.


Was hoping when you put the new starter in that it would fix your problem. I'm having the same issue and was going to buy the new starter today. My relay is on the battery side of the fender like you are going to do but I'm still having the same issue after driving it for some time. I'm still going to get the starter but I will be curious to see what you find out. Keep us posted.
 
OP
OP
Lunar-tic

Lunar-tic

Sr. Member
Joined
Sep 28, 2009
Messages
629
Loc.
Brentsville
if it isn't the starter or the relay i'll be stumped....and out about a 100 bucks. But that new starter was worth it, like going from drum to disc worth it, for me anyhow. I'll let you all know what pans out.
 
Top