• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Securing Bronco to Trailer

helo-mech

Sr. Member
Joined
Jun 22, 2007
Messages
621
Alright, the time has come to haul the Bronco from TX to CA. Rather than let my pride get in the way and pretend that I know everything about securing a vehicle to a trailer, I am reaching out for tips and pitfalls.

I will be making the 2,000 mile trip with a 27' Penske truck and car hauler. It has the tire nets on the front but I have no intention of relying solely on those. If you have an suggestions for tie-down points I am all ears.
 

NicksTrix

Bronco Guru
Joined
Aug 1, 2001
Messages
6,410
i like to go over the radius arms behind the housing with an axle strap and X the straps. rear i use an axle strap as well, watch your brake lines. don't want to crush them. you can also go over/around the spring pack by the housing pad. i also X the straps. no need to buy really long straps. a 10 footer is plenty.

so like to pull the chassis down as well or soley pull to it and pul the springs down. just have to watch it over the bumps.

i also am curious who the transporters tie the trucks down when the ship. these days i really just see the tire strap set ups being up.

do what works for you and you feel comfortable with.
 

Apogee

Contributor
Bronco Guru
Joined
Nov 26, 2005
Messages
6,348
Loc.
Tangent, OR
If Penske is anything like U- Haul's car trailers the tire nets won't fit anything over a 30" tire.

That's not true...if you air down to about 4 psi, you can squeeze a 32" under 'em. :eek: Desperate times call for desperate measures.
 

TwoDalesDad

Bronco Guru
Joined
Jul 19, 2011
Messages
1,515
After my last U Haul experience.....I won't go back....After unloading 3. ROLLAWAY TOOL BOXES...ON THE RETURN TRIP...WITH EMPTY TRAILER...AT FIRST THOUGHT I HAD A FLAT TIRE....THEN THE WHIPPING STARTED....THANKING GOD....THE ROAD WAS EMPTY...IF I WAS IN A SMALLER TRUCK....I WOULD HAVE BEEN IN THE DITCH...MY CC F350 POWERSTROKE SAVED MY ASS
 

ScanmanSteven

Bronco Guru
Joined
Dec 19, 2010
Messages
1,129
Everyone has opinions so here's mine. Lilthom suggested I do this and I have been real happy with the results. Strap down only the axles, not the frame or body. This way the Bronco suspension works while on the trailer and makes it ride easier. I hook a ratchet strap to the front axle yokes, same as an axle strap, then hook the other end to a D-ring on the trailer. I wrap other straps around the rear axle and hook them to D-rings. I built the trailer so I have D-rings fairly close to my axles so there is very little movement once their tightened down. I don't X mine based on this theory(mine). The shorter the distance between the strap and axle means in an unfortunate accident or very aggressive move the Bronco can't move because it's strapped so close to the trailer. If one of the X straps breaks that could allow the Bronco to tip to one side even though it's strapped down.
 

ScanmanSteven

Bronco Guru
Joined
Dec 19, 2010
Messages
1,129
Hey I just noticed you're from League City, we have cousins that live there. Your best bet would be take your Bronco to their house and I'll haul it safely back to MO on my trailer strapped down as described above. You won't miss it too much and here it can play with my Bronco, lol.
 

jw0747

Bronco Guru
Joined
Nov 22, 2006
Messages
2,434
Loc.
San Antonio, TX
Have never used a Penske car hauler but have used a UHaul many times and would assume they're similar. If you haven't rented the moving rig yet be careful of what you say to Penske rep when you do rent. If they ask your Bronco's tire size don't reveal the actual size if your tires are anywhere bigger than about 29 or 30, otherwise if Penske's like UHaul they won't rent you a car hauler. Some guys have to boast about their big tires and it blows the whole deal. They probably will ask what vehicle goes on the car hauler and it's best to say Prius, Mini Cooper or anything small.

As said above if your tires are bigger than 29 or 30 those front tire web tie downs won't work. Best bet is to get 4 ratchet straps that are a minimum of 2" wide and rated somewhere around at least 3,000 lbs. and maybe some axle straps. It's best to drag the car hauler home empty and then load and strap the Bronco down after you've looked for the best places on the hauler to strap it down. UHaul haulers don't have D-rings anywhere on the deck to tie down so I had to use common sense to figure out where to tie down.

If your ratchet straps have fairly narrow hooks on the ends there are oblong holes in the underside of the Bronco frame both front and rear where I inserted my hooks for tie down.
 

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
I don't X the straps either. I used to be a field rep for U-Haul many many moons ago. I hauled trailers and trucks around. We used chains secured to attachment points on the frame, similar to overseas shipping.

When I haul the Bronco I use ratchet straps with a built-in D ring and pad to loop around the the axles, aware of the brake lines as states above, and clip to a D ring on the trailer. As stated above, to let the suspension work.

However you decide, it's important to check the straps fairly frequently along the journey, especially the beginning, and if they're new they will stretch to break in, so you will need to check them more often.
 

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
These guys make some nice products. Might be worth watching some of their videos to give you some ideas.

http://www.macscustomtiedowns.com/tricks

That's what I use. Mac's has a great padded axle strap which you sling around the axle at each point. I don't X my straps either for the reasons mentioned.

39E7F952-9828-4EA4-993E-D8CBAD778733_zpsxiyir8ie.jpg
 

Captain Ken

Full Member
Joined
Dec 28, 2012
Messages
185
Loc.
Out to Sea
I use a a 3500 lb. ratchet strap on each axle. I go from one D-Ring on the trailer, under the axle and over the diff, then back under the axle to another D-Ring. Front and rear.
I've found that this gives a much better ride than compressing the suspension.

I just finished a 1500 mile trip like this, and will be heading from CT to WA using the same rig next month.
 

gnpenning

Contributor
Bronco Slave
Joined
Dec 26, 2011
Messages
2,601
Loc.
I have more questions than answers.
All the above works. Straight tie downs control front to back but not very much side to side (shorter ties help). By Xing you control front to back and side to side better (again short runs). Type of roads and driving habits all come in to play. Securing to axles controls movement and less likly to loosen. If you have a tall lift or other top heavy items you can load the suspension as well.

When we haul heavy equipment we always X. Not likely will you see anyone hauling heavy any other way.

Yes the EB is way lighter and many trailer decks you will be hauling with will have a lip. It takes the same time to X as straight. As mentioned many have hualed many years and miles with both with no issues. Me I X.
 
OP
OP
helo-mech

helo-mech

Sr. Member
Joined
Jun 22, 2007
Messages
621
You guys/gals are awesome. Thanks for all the tips. I won't say which way I'm going, but I really do appreciate all the feedback.
 

moses_m

Full Member
Joined
May 5, 2013
Messages
262
I do the Cal to TX trip twice a year. I wrap chains around the axles and use chain come alongs and chain booms. Like above I let the bronco suspension do its work. I would worry more about the tires on any rental trailer.
 

rekoj71

Sr. Member
Joined
Apr 18, 2009
Messages
361
When I tried a U-Haul car hauler about 15 years ago I had to air down even for 31inch tires to fit. The tire nets position forced the short Bronco to the front of the trailer and made the tongue weight all screwy. I was pulling with an F-150 and got a bad fishtailing at about 40mph and the soft suspension on my Bronco started waving the whole trailer even more. Scared the crap out of me and thought I was going to loose it.
I returned it for a dolly cause I needed to leave that day, but after, I realized I could have bought a tow bar and flat towed for less than the rental units cost.
 

stagecoach

Jr. Member
Joined
Aug 2, 2013
Messages
115
Loc.
Castro Valley, ca
Just be sure when you position your EB that more than half the weight is in front of the front axle on the trailer. If more weight is behind said axle the trailer will start to whip about as you gain speed. have a safe trip.
 

englewoodcowboy

Lick Creek Restorations
Joined
Jul 25, 2010
Messages
4,201
Everyone has great ideas and means to do the task. I like the tire net idea but as others mentioned they do not fair well with larger tires so I resort to 4 2" ratchet straps and use one at each wheel and either X them at each point or make sure they are splayed in enough of an angle to create opposing forces. As others have pointed out to be careful of brake lines etc. but in the end as I tell my drivers, you can never have too many straps to secure an object. Make sure you have enough to exceed the weight of the vehicle x2 so you have built in redundancy if you lose a strap or two that it will remain fastened to your trailer. In the end you are responsible for that load in the eyes of the law so do what you feel is necessary and following any of the guidelines that have been posted here you will do fine. Just do not trust your load to those cheap uncertified straps. Good luck.
 

Wyflyer

Bronco Guru
Joined
Apr 1, 2008
Messages
2,920
I've done it both ways but I prefer to tie to the frame instead of the axles. I don't like the body roll going on while travelling.
I chain over the springs by the rear hangers, or over the receiver hitch frame. Then drive the bronco forward to tighten the chain which loads the rear springs. Then chain the front down with a boomer on each side to load the front springs.

I tried to rent a uhaul trailer once to haul a Bronco, and once I said "Bronco" they refused to rent one, said Broncos were too big for their trailers. I tried to get through their head that it weighs less than a ford explorer but if it aint' in their computer it aint happening. So I went down the street and bought a trailer.
 
Top