• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Daves 71 NH Build

Slednut10

Contributor
Guru? That's funny!
Joined
Sep 26, 2013
Messages
2,398
Good to see progress, Dave. Where are you getting your grit?
 
OP
OP
dave67fd

dave67fd

Bronco Guru
Joined
Sep 24, 2010
Messages
2,864
Thanks guys.

Art,
Black Diamond at Tractor Supply, $8 for a 50 lb bag. Used 100lbs to do the axle, backing plates and one "C" cap.%)

Jason,
Thanks. Let us know when you start, would love to check it out.
 

Slednut10

Contributor
Guru? That's funny!
Joined
Sep 26, 2013
Messages
2,398
Art,
Black Diamond at Tractor Supply, $8 for a 50 lb bag. Used 100lbs to do the axle, backing plates and one "C" cap.%)

That's where I picked up mine too. Had to bring back 3 bags because they were wet inside and I did not catch it until I unloaded them from the truck. They like to store stuff outside.
 
OP
OP
dave67fd

dave67fd

Bronco Guru
Joined
Sep 24, 2010
Messages
2,864
That's where I picked up mine too. Had to bring back 3 bags because they were wet inside and I did not catch it until I unloaded them from the truck. They like to store stuff outside.

Ya Art, there were only three left on the shelf when I went, maybe the three you brought back;D. No, they were pretty dry. The blaster I have used quite a bit of media and alot of air. Almost makes me want to look for a larger compressor.
 

Slednut10

Contributor
Guru? That's funny!
Joined
Sep 26, 2013
Messages
2,398
Ya Art, there were only three left on the shelf when I went, maybe the three you brought back;D. No, they were pretty dry. The blaster I have used quite a bit of media and alot of air. Almost makes me want to look for a larger compressor.

Nah, you would have known if it was wet-clumps like kitty litter:p

My 80 gal 2 stage Puma is rated at 20 SCFM-it keeps up fine while blasting with my 'little' PK Lindsay unit but generally doesn't shut off until I stop or run out of grit.
 
OP
OP
dave67fd

dave67fd

Bronco Guru
Joined
Sep 24, 2010
Messages
2,864
Nah, you would have known if it was wet-clumps like kitty litter:p

My 80 gal 2 stage Puma is rated at 20 SCFM-it keeps up fine while blasting with my 'little' PK Lindsay unit but generally doesn't shut off until I stop or run out of grit.

Thats the ticket. Mines only half that:cry:
 

Slednut10

Contributor
Guru? That's funny!
Joined
Sep 26, 2013
Messages
2,398
Which nozzle are you running? If you can drop a nozzle size it will help with the air consumption and help a bit with grit use too.
 
OP
OP
dave67fd

dave67fd

Bronco Guru
Joined
Sep 24, 2010
Messages
2,864
Not sure. The one that came installed with it but I did get 2 or 3 others with it as well. It made short work with the one I had but yes I have read up on them and it's all in the nozzle on consumption on both.

I also want to change out the ball valve for the grit feed from a wing knob to a lever. Pain to adjust.
Thanks for the input Art.
 
OP
OP
dave67fd

dave67fd

Bronco Guru
Joined
Sep 24, 2010
Messages
2,864
Found some time to blast and paint a few more items.
Cleaned up and detailed my 25 yr old premiums and started on the 44.
 

Attachments

  • DSC02504.jpg
    DSC02504.jpg
    92.3 KB · Views: 107
  • DSC02501.jpg
    DSC02501.jpg
    104.7 KB · Views: 103
  • DSC02506.jpg
    DSC02506.jpg
    82.3 KB · Views: 101
  • DSC02505.jpg
    DSC02505.jpg
    61.2 KB · Views: 111
  • DSC02508.jpg
    DSC02508.jpg
    105.5 KB · Views: 106
  • DSC02502.jpg
    DSC02502.jpg
    116 KB · Views: 99
OP
OP
dave67fd

dave67fd

Bronco Guru
Joined
Sep 24, 2010
Messages
2,864
Tore down the 44. Axle u-joints and ball joints are out.
Then got her blasted.

Made some room in the garage to tuck the tub in the corner.
 

Attachments

  • DSC02583.jpg
    DSC02583.jpg
    114.4 KB · Views: 77
  • DSC02582.jpg
    DSC02582.jpg
    102.9 KB · Views: 78
  • DSC02580.jpg
    DSC02580.jpg
    104.7 KB · Views: 91
  • DSC02581.jpg
    DSC02581.jpg
    116.5 KB · Views: 97
  • DSC02584.jpg
    DSC02584.jpg
    97.3 KB · Views: 123

migs

Sponsor/Vendor
Bronco Guru
Joined
Nov 12, 2011
Messages
1,451
Lookin good!

I'm jealous that your corners are big enough to just tuck a tub out of the way... show off!;D
 

fatboy

Contributor
Glad to be here.
Joined
May 15, 2006
Messages
7,145
Loc.
New Hampshire
Tore down the 44. Axle u-joints and ball joints are out.
Then got her blasted.

Made some room in the garage to tuck the tub in the corner.

Time for a trip to Maine for a cut and turn it looks like to me!

Lookin good!

I'm jealous that your corners are big enough to just tuck a tub out of the way... show off!;D

His corners are bigger than my whole garage!
 

Slednut10

Contributor
Guru? That's funny!
Joined
Sep 26, 2013
Messages
2,398
Time for a trip to Maine for a cut and turn it looks like to me!


His corners are bigger than my whole garage!


It took 2 degree c bushings and 1.5 degree ball joint eccentrics to get 3.5 degrees total caster on mine so you might want to consider it Dave. I might still have to do it too.

It is a nice shop, Pete. I wish mine was that clean.
 
OP
OP
dave67fd

dave67fd

Bronco Guru
Joined
Sep 24, 2010
Messages
2,864
As usual I have to get one other car in for the winter. I'm moving crap around like crazy to see what works best. I'm sure gonna be out of room with 2 cars, a tub, frame and room left to work.

I have 7 deg. bushings but may decide to cut instead. I'm gonna prime it up and then need to do both R&P's. will figure it out then.

It is a nice shop, Pete. I wish mine was that clean.

You could have a BONES garage cleaning get together. Just not sure who would come though.;D
 
Top