• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Wire connectors.

crawler73

Sr. Member
Joined
Feb 7, 2011
Messages
361
I'm about to start working on my wiring harness. I got the E-Z harness so I will be doing a lot of my own connections. What is everyone using for connectors? Just the ones from the auto parts store, or do they make something better? Also need a good crimper. What's worked best for everyone?
 

Tedster100

Chairman of the Bored
Joined
Aug 25, 2010
Messages
1,762
These are what I used. Similar to what Randy posted. You can get 2-6 pin connectors and there are two styles or sizes of terminals. Pretty cheap compared to some other options. I have them everywhere wires are connected in groups. Tail & marker lights, driving lights and several on the dash so I can unplug and remove quickly. Just make sure to solder the connectors and your wiring should be trouble free.

http://www.summitracing.com/parts/sum-900491/overview/
http://www.summitracing.com/parts/sum-900496/overview/
 
OP
OP
C

crawler73

Sr. Member
Joined
Feb 7, 2011
Messages
361
I should of said terminal ends. Like fork, blade and ring terminals. Sorry for the mix up.
 

ransil

Bronco Guru
Joined
Sep 6, 2003
Messages
8,138
Aaaà no on the harbor freight :)

Ring terminals can also be had at waytec , get nylon insulation so they can be soldered
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
I got the small kit, wish I got the big one instead http://www.delcity.net/store/Heat-Shrink-Terminal-&-Installation-Kit-!-Large/p_731947
I also picked up a refill tub http://www.delcity.net/catalogdetails?item=891

And all the quick connects are done with weatherpacks. I considered the other versions but the weatherpack offered the biggest wire gauge option. Allows me to feel more comfortable running a bit more amperage through the connector. Did a complete boat rewire with this stuff as well. Amazing how much work a simple boat is for wiring, everything is double as fiberglass has no grounds.
 
OP
OP
C

crawler73

Sr. Member
Joined
Feb 7, 2011
Messages
361
Would this be a good crimp tool. There is so many options for each type of terminal it's a little confusing.
 

Dbteak

Sr. Member
Joined
May 23, 2006
Messages
438

Dbteak

Sr. Member
Joined
May 23, 2006
Messages
438
These are what I used. Similar to what Randy posted. You can get 2-6 pin connectors and there are two styles or sizes of terminals. Pretty cheap compared to some other options. I have them everywhere wires are connected in groups. Tail & marker lights, driving lights and several on the dash so I can unplug and remove quickly. Just make sure to solder the connectors and your wiring should be trouble free.

http://www.summitracing.com/parts/sum-900491/overview/
http://www.summitracing.com/parts/sum-900496/overview/

X2 on the summit weather tite connectors and pliers.
 

AxlesUp

Sr. Member
Joined
Dec 21, 2001
Messages
424
Loc.
Collierville TN

I did the same thing except i figured out what sizes and types i needed and bought bulk bags of 3m heat shrink connectors on amazon. I do have and use a roll of heat shrink tubing as well for outside the cab connections. Makes me feel all warm and squishy knowing that they have two layers of heat shrink on them LoL

also bought a roll of this stuff:

http://www.amazon.com/gp/product/B000QFORQW?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00

best idea i ever had.


I may buy and add some of those pin connectors from summit! That's a good find for the $$$$$$
 

Flhtrdr

New Member
Joined
May 1, 2015
Messages
47
Loc.
Western, Ky.
When using the crimp on connectors take time to solder them and use heat shrink tubing, it will pay off down the road. Just crimping I have found the wires can still work loose or if not crimped tight enough corrosion.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
A correctly crimped connector is best without solder. Problem is most crimping is done so poorly that solder is the Band-Aid that is needed. A good crimp will form on the wire to the point it is a solid mass of connector and wire.
 
OP
OP
C

crawler73

Sr. Member
Joined
Feb 7, 2011
Messages
361
I like the idea about using the bare terminal and heat shrink. I was planning on using heat shrink anyway so I guess there is no point in having a nylon jacket and the heat shrink over that.

So now I guess the debate is over solder. Seems that if it's a good crimp then solder would only give it extra strength?
 

marklc

Sr. Member
Joined
Jul 30, 2007
Messages
611
As an electrician I like to get a good crimp , solder and heat shrink. Can't beat it for good conductivity and corrosion resistance. JMO
 

marklc

Sr. Member
Joined
Jul 30, 2007
Messages
611
I also recommend getting a good set of crimpers. Those ones that come in those kits are usually junk IMO.
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
An argument against solder is that it can wick up the wire which can make it stiff where it needs to be flexible, increasing the chance it will break.
 

Bferrari

Sr. Member
Joined
Mar 6, 2013
Messages
857
If everything is clean and prepped a solder connection is far superior to a crimp. You are fusing the two pieces together which takes advantage of the entire surface area of both pieces versus a crimp that wedges a portion of the connector to a portion of your conductor and can leave area open for corrosion which can lead to a high resistive connection. Don't get me wrong, crimps are fine and used all the time but if you are asking what is best, it would be a soldered joint. If you are using solder connectors then there is no need to crimp prior to soldering, just solder them together. Greybar in Goleta sells a lot of the sta-kon connectors as well as the Thomas and Betts crimpers which are my personal favorites. As others have stated, the weather pack connectors would probably be the way to go for what you are doing.
 
Top