• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Front end steering replacement

kat

Bronco Guru
Joined
Jul 22, 2015
Messages
1,057
Loc.
Bristol
My 76 Bronco has had some not so original equipment installed on its front end steering. As you can tell by the pic he has swapped some pieces out. Can I buy just the welded piece or do I have to replace the all the steering components. I guees he was trying to make a "Y" steering into a "T" steering. Sorry If my termanalogy is wrong
 

Attachments

  • 20151209_120922.jpg
    20151209_120922.jpg
    106.7 KB · Views: 386

Whoaa

Bronco Guru
Joined
Sep 26, 2014
Messages
1,059
Congrats on buying a new-to-you Bronco!

I've seen some interesting stuff, the lap welded drag link is a new one to me though.

You'll need a new drag link, and a new tie rod. You can't mix-n-match old wore out parts w/ new parts and ever expect them to work together properly. You'll also want a new, adjustable trac bar

It appears that you have a drop pitman arm. There are different ways to achieve the same result, but ultimatley you'll want the drag link and trac bar to be parallel with each other.

All of the vendor's carry these parts, sometimes refered to as Y to T swap for 76' and 77' models.

Here is a pic that clearly show the adjustable track bar that you'll want

And here's a pic that shows the Y to T conversion tie rod assembly for 76/77' front ends
 
Last edited:

C Saporito

Full Member
Joined
Oct 18, 2007
Messages
259
I'd think twice about driving around while trusting someones weld to steer my new truck, plenty of good stuff available.
Is that a block under the spring mount or an optical illusion?

BTW, nice truck!
 

half cab

Contributor
Guru Bronco
Joined
Dec 8, 2010
Messages
16,311
Get rid of that big block lift ...that was the beginning of their problem!
 

half cab

Contributor
Guru Bronco
Joined
Dec 8, 2010
Messages
16,311
I would either convert to a T with a new lift or go back original Y n drop down to a 2,5 Lift.
 

JAFO

Bronco Guru
Joined
Dec 3, 2007
Messages
1,556
Loc.
Beaverdam
I installed the Wild Horses 2.5" suspension lift and love it. Adjustable track bar.
Don't drive that truck until you replace with something else other than a welded bar.
Frame_3.jpg
 

JefeAZ

Bronco Guru
Joined
Aug 23, 2011
Messages
3,088
Loc.
Tucson
Not to hijack your thread but im in a similar position. Upgraded a few things but also original on some of the key components.

IMG_3423_zpsuc51fxha.jpg


IMG_3425_zpsfxggvseq.jpg


Went to a 3.5" coil up front so I went with the drop pitman arm and the riser bracket. That seemed to help quite a bit but steering is still a little finicky. How much would an adjustable track bar help? What else?

20151108_150106_zpswbx5jjd3.jpg


20151108_150053_zpsmxwwrygw.jpg
 
Last edited:

Whoaa

Bronco Guru
Joined
Sep 26, 2014
Messages
1,059
Not to hijack your thread but im in a similar position.

Went to a 3.5" coil up front so I went with the drop pitman arm and the riser bracket. That seemed to help quite a bit but steering is still a little finicky. How much would an adjustable pitman arm help? What else?

I think you meant adjustable trac bar. The trac bar centers the diff, when the lift is installed it stretches the angles which in effect moves the front diff to the R. The adjustable trac bar allows to center the diff and dial it in to your set up.


For superior driveability the trac bar and drag link need to be parallel. With these series of pic's I can't tell how parallel your set up is. We need to see a straight-on pic while the rig is sitting on its own weight.
That said, one easy solution to making a slightly adjustment to this angle is to move the tie rod to the top of the knuckles (TRO)...this is an easy job. Buy a reamer for under $50 bucks, remove your tie rod end, chuck the reamer in your rechargable drill and ream the hole from the top down -takes about 5 minutes, then put it all back together. This moves the tie rod up about 2-3" and effectively changes the drag link angle in relation to the trac bar, making it more parallel...if needed. Notice in my pic's the tie rod is on top of the knuckle.

However, taking into consideration you're at 3 1/2" of lift, drop pitman arm and using a trac bar riser welded to the housing you may not need to put the tie rod on top...unless you wanna go back to the stock pitman arm
 

JefeAZ

Bronco Guru
Joined
Aug 23, 2011
Messages
3,088
Loc.
Tucson
Ya sorry, adj track bar. You can kind of tell my axle isn't centering, both springs are slightly leaning towards the drivers side. This is the best shot I have at the moment:

20151108_145330_zpsla3tm3f6.jpg


My Uncle was showing me how much more movement I had in my steering shaft compared to my drag link. Looks like some adjustment is needed there as well but thats probably last. Steering stabilizers still necessary?
 
Last edited:

Whoaa

Bronco Guru
Joined
Sep 26, 2014
Messages
1,059
^ ditch the stabilizer, it only "mask" real problems and doesn't do anything useful.

When installing the new [adjustable] trac bar you can take some measurements from the frame to the outside of the front diff. And take similar measurements on the rear end end housing to the frame. In a perfect world you want both the front and rear axle housings "centered" to the frame.

If you wanna see something scary, have someone drive it as-is and follow behind them. Align yourself where you can easily see a straight line from rear to front tires. You'll clearly see how far off trac it is and doglegs as it drives down the road.

All Bronco's have some slightly differences. The adjustable trac bar will allow you to dial-in this one to the way its set up. This is the one I'm using http://www.wildhorses4x4.com/product/Adjustable_Trac_Bar and seems to work good, and I just read a better explained explanation than I can do on this link.
 
Last edited:

savage

Bronco Nut
Joined
Apr 18, 2007
Messages
2,483
Loc.
Renton
Hey JefeAZ, when you said(My Uncle was showing me how much more movement I had in my steering shaft compared to my trac bar). Did you mean your drag linkage and tie rod? If so , you should not have play in the drag or tie rod, it might be whore out. I have a 74 with a 3.5 inch lift and it tracks and steers great. I went with a drop bracket and adjustable bar to get my track bar and drag bar in line with each other, and all new steering drag and tie rod
 

Attachments

  • 004.jpg
    004.jpg
    59 KB · Views: 175

savage

Bronco Nut
Joined
Apr 18, 2007
Messages
2,483
Loc.
Renton
kat , I agree that you should fix that before driving it.Get ride of the blocks up front , and replace with a good set of lift springs and replace the welded drag linkage with a new one.
 

savage

Bronco Nut
Joined
Apr 18, 2007
Messages
2,483
Loc.
Renton
Hey kat, I went back to your picture and notice the bracket that the radius arms connect to, is drop with what looks like a square tub. I would get ride of the tubing with a good drop bracket for the radius arms.
 

Attachments

  • 014.jpg
    014.jpg
    60 KB · Views: 203

JefeAZ

Bronco Guru
Joined
Aug 23, 2011
Messages
3,088
Loc.
Tucson
Did you mean your drag linkage and tie rod? If so , you should not have play in the drag or tie rod, it might be whore out.
Ill have to look at it again but he had me watch the steering shaft in correlation to the drag link through the engine bay. It would only move about half as much as the steering shaft just by moving the steering wheel an inch. Said a 1/4 turn on the box would even that out
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
Is that welded too?

Scary what some people think is okay to run down the road.
 

Attachments

  • 20151209_120922-wtfit.jpg
    20151209_120922-wtfit.jpg
    198.6 KB · Views: 181
OP
OP
kat

kat

Bronco Guru
Joined
Jul 22, 2015
Messages
1,057
Loc.
Bristol
Yeah the whole truck seems to maybe have been modified about 15 years ago. But Im going to do my best to modernize it.

I ordered the linkage and adjustable track bar, now brings me on to another question. I see all the "cool kids" are painting the linkage. What is the best procedure to do this? Sand it or clean it with some thinner the get out a rattle can and go to work on it?? Because I am wanting to cover up the yellow and blue calipers and dust covers that is on it....
 

Teal68

Contributor
Bronco Guru
Joined
Mar 28, 2013
Messages
2,679
Loc.
Inlet Beach
Mark,
Because I'm familiar with this Bronco I know none of the ball joints are sloppy or worn so you have two options:
Option 1. Buy this drag link and you will have to cut about 3/4" of threads off each end to make it work as well as ream the pitman arm or buy a 75 or earlier pitman arm.
http://www.tomsbroncoparts.com/product/adjustable-drag-link-t-style-66-75-early-ford-bronco-new
Option 2. Get the complete Y to T conversion and either ream the pitman arm or buy the 75 or earlier pitman arm.
http://www.tomsbroncoparts.com/product/steering-linkage-conversion-from-inverted-y-to-t-style-76-77

The latter of the two is the better in my opinion because it is matched to work together...but a bit more expensive of course. I only mentioned option one because I know the ball joints on the existing tie rod have no slop.

Additionally, there are several comments about an adjustable trac bar. Knowing the front axle is centered already and there is no bumpsteer I would not bother with getting an adjustable trac bar.

sykanrOng,
That would be scary, but that is not welded together there even though it looks suspect in that photo.
 
Last edited:

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
I would definitely go to the T style steering, if it was stock height the Y type steering would be better but those do not do well with more than a very small lift.
 
Top