• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

A/C Vent Options?

Pechin0351

Jr. Member
Joined
Jun 30, 2010
Messages
82
I am installing an AC kit from BC Broncos. I am looking at different vent options. I am not super excited about the vents that come with the kit. Has anyone installed one of these kits (or a different kit) using in dash vents? I like the way the modern round F150 veins look. But I’m not sure how excited I am to try and place them properly in the dash. Pics, examples, ideas? My Bronco has a ZF, and I’m dash off right now, balls deep in an American Autowire harness install.
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
i'M Watching so I can keep an eye one this question.
Seems like about 3 years ago summertime we had a big discussion about VENTS
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
Explorer and F-150 round vents have been used.
I think BC sells the Explorer vents. But you can find them on EBay
 
OP
OP
P

Pechin0351

Jr. Member
Joined
Jun 30, 2010
Messages
82
I like the idea of the round vents. I’m hoping someone can give some installed pictorial examples.
 

AZ73

Bronco Guru
Joined
Mar 28, 2012
Messages
3,813
These come with silver doors too (like the F150's) but I wanted black for the centers because I glass beaded the aluminum trim rings and couldn't make the centers look the same. I looked at these but they were pricey:

https://www.restomodair.com/view-all-products/vents/

And you can get a lot of different factory car vents from here:

https://www.1aauto.com/dash-vents/c/269

You can also page through these dash threads and look what others have done.

http://classicbroncos.com/forums/showthread.php?t=282787

http://classicbroncos.com/forums/showthread.php?p=2228423#post2228423
 

Attachments

  • IMG_1101.jpg
    IMG_1101.jpg
    136 KB · Views: 186
  • IMG_1102.jpg
    IMG_1102.jpg
    128.8 KB · Views: 157
  • IMG_1148.jpg
    IMG_1148.jpg
    55.6 KB · Views: 138
OP
OP
P

Pechin0351

Jr. Member
Joined
Jun 30, 2010
Messages
82
Nice setup. Thanks for sharing. So far, starting with a blank dash seems like the best way to go with round vents. I just a my stock 69 dash.

These come with silver doors too (like the F150's) but I wanted black for the centers because I glass beaded the aluminum trim rings and couldn't make the centers look the same.
 

KeithKinPhx

Sr. Member
Joined
Jan 8, 2017
Messages
451
Just ordered a custom dash from BC for my vintage AC setup. They are cutting the holes and installing the mounting brackets. I'm installing the F-150 vents from the 09-14 models. CJ Pony sells a stainless steel overlay kit I may bling it with later.
 

Attachments

  • image.jpeg
    image.jpeg
    28.5 KB · Views: 152
Last edited:

BA1125

New Member
Joined
Oct 18, 2011
Messages
48
KeithKinPhx,

Did you order the BC Broncos a/c kit too?

How much did the dash and the work they are doing run you? I am about to order a dash from them and was dreading laying out the vents in proper locations.
 

74 Bronco Billy

Contributor
Sr. Member
Joined
Jul 4, 2016
Messages
798
If you choose to make the holes yourself, the Blair rotabroach hole cutters are the best. Clean cuts, they stay sharp, can be used on materials up to depth of cutter head.
2eaa0ec877e31b0047d8fe12ec77d87c.jpg


Sent from my SAMSUNG-SM-G930A using Tapatalk
 

KeithKinPhx

Sr. Member
Joined
Jan 8, 2017
Messages
451
KeithKinPhx,

Did you order the BC Broncos a/c kit too?

How much did the dash and the work they are doing run you? I am about to order a dash from them and was dreading laying out the vents in proper locations.

Yes I ordered the full AC. Haven't received the final bill yet. Only drilling holes for the light switch, wipers, ignition, 3 AC vents, Vintage AC control and glove box.

I sent them a picture of what I wanted from another owner I found online and let them know the changes I wanted from that one.

I got the last blank BC had in stock with the glove box shifted left. I want one vent to the right of the glove box, like modern cars do. The thought of those black vents hanging under my dash really bothered me. So for a few hundred dollar, issue solved. That may be the Bronco catch phrase "for a few undress dollars."

Haven't received yet. They were working on it Friday and supposed to ship this coming week. Their employee Adam is the guy who does all of them and is the expert.
 

STalon89

Full Member
Joined
Oct 15, 2016
Messages
311
Yes I ordered the full AC. Haven't received the final bill yet. Only drilling holes for the light switch, wipers, ignition, 3 AC vents, Vintage AC control and glove box.

I sent them a picture of what I wanted from another owner I found online and let them know the changes I wanted from that one.

I got the last blank BC had in stock with the glove box shifted left. I want one vent to the right of the glove box, like modern cars do. The thought of those black vents hanging under my dash really bothered me. So for a few hundred dollar, issue solved. That may be the Bronco catch phrase "for a few undress dollars."

Haven't received yet. They were working on it Friday and supposed to ship this coming week. Their employee Adam is the guy who does all of them and is the expert.

How much additional was it for them to cut the dash for you?
 

BroncoWanted

Sr. Member
Joined
Apr 6, 2009
Messages
556
Loc.
North Mississippi
I used the BC kit on mine but I used aircraft style vents through the dash. Works pretty well for me. I used the Aveo Anodized Aluminum Ball Vents. They are a little pricey but have a nice clean look.
 
Top