- Joined
- Jun 8, 2010
- Messages
- 2,213
I'm tired of searching. There is NOTHING on even the universe's internet (outernet???) about this idea. How come no one has ever discussed this in public on the internet???
Use a flat top Cleveland piston in a 302 with 2v heads to get 9.3-9.5 compression ratio...
KB177 pistons are relatively affordable and heads are plentiful. Even the later 4v heads have the huge chambers if a man wanted to go that way.
Here's the math: 1.5" half stroke + 5.090" rod + 1.67 Compression height = .054 above deck. with .041 compressed HG that's .013 into the chamber with at least another .050, maybe .075 to go before interference with the head.
My compression figures are based off a 78cc chamber, but those heads may actually be 74. I can't remember and I don't have the equipment to measure.
What say you?
(I'm working on a sentimental resto project that requires this engine to be historically accurate. doesn't have to make big power, but I need it to wear the original 180 degree headers that were on the original Boss 302.)
Use a flat top Cleveland piston in a 302 with 2v heads to get 9.3-9.5 compression ratio...
KB177 pistons are relatively affordable and heads are plentiful. Even the later 4v heads have the huge chambers if a man wanted to go that way.
Here's the math: 1.5" half stroke + 5.090" rod + 1.67 Compression height = .054 above deck. with .041 compressed HG that's .013 into the chamber with at least another .050, maybe .075 to go before interference with the head.
My compression figures are based off a 78cc chamber, but those heads may actually be 74. I can't remember and I don't have the equipment to measure.
What say you?
(I'm working on a sentimental resto project that requires this engine to be historically accurate. doesn't have to make big power, but I need it to wear the original 180 degree headers that were on the original Boss 302.)













in favor of some Cleveland’s.