• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Questions about original bumpers

Bill R

New Member
Joined
Oct 5, 2017
Messages
41
I have a 76 Ranger with chrome bumpers. I have no way of knowing but I assume they are original. I have some questions:

(1) Are the front and rear bumpers identical?

(2) What size are the carriage bolts?

(3) Did they all have the two square holes on the face of the bumper?

(4) Were these holes originally plugged with a bolt if not used for bumperettes?

Thanks for any information
 
Last edited:

half cab

Contributor
Guru Bronco
Joined
Dec 8, 2010
Messages
16,311
But what? Ranger would have came with factory chrome bumpers.
 
OP
OP
B

Bill R

New Member
Joined
Oct 5, 2017
Messages
41
I know the Ranger came with chrome bumpers but my assumption is that the bumpers on there now are the original ones. The bumpers were attached with a couple of different size bolts which made me wonder.
 

Bronco Junkie

So Cal Broncos
Joined
Feb 29, 2012
Messages
3,246
I don't the answer for sure but all the vendors only sell one stock bumper so it appears to be the same front and rear. All stock bumpers I have dealt with have the square holes. They could have bumperettes or carriage bolts depending on how the Bronco was ordered.
 

chuckji

Contributor
Sr. Member
Joined
May 5, 2017
Messages
471
Loc.
SE Michigan
I believe front stock bumpers had the square holes for the bumperettes, rears have no such holes.
 

nickgp

Bronco Guru
Joined
Jan 17, 2010
Messages
1,024
Bumpers are same front and rear. Takes a standard bumper bolt.
 
OP
OP
B

Bill R

New Member
Joined
Oct 5, 2017
Messages
41
Thanks for all the replies - especially the link to the old thread.
 

El Kabong

Contributor
Driving stuff Henry built
Joined
Oct 8, 2009
Messages
1,559
Fwiw, regular carriage bolts are soft grade 2. My guess is that proper bumper bolts are stronger.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
A common issue for those using their rigs off-road was the frame ends tearing out at the holes when a bumper catches on a rock or something.
Not a big issue with stock bumpers, as the bumper tacos out first (near the bolt by the way) but with anything heavier duty, the frame tears open.

It's really not that thick in the material used. It's hell for strong compared to most frames of the day, and being boxed like it is, is also less prone to flex and is a nice design.
But the frame horns are the weak link.

Paul
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Is anyone reproducing the early style 66-67 bumpers yet?

Not that I've noticed anyway. I think someone asked this a few months ago and nobody in the Scott Drake/Dennis Carpenter/Dynacorn world were talking about it at the time.
Seems to me there would be just enough demand for them to be worthwhile. Especially since some of the old pickups used the same bumper, didn't they? Or at least a variation on the same theme?

Paul
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
They already have the dies to make the channel just cut the ends straight for the back bumper and straight & canted ends for the front.
 

BajaBronco

Contributor
Bronco Guru
Joined
Apr 30, 2003
Messages
4,101
One thing I've noticed is that the original bumpers are stamped "deeper" than the repros, making original cactus smashers, original bumperettes, and some other pushbars not fit as they should. I can also see it. I save and replate bumpers for many of my restorations.

I dont believe any Bronco bumpers interchange with any Ford trucks.
 
Top