• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Sagainaw 6 turn P.S. too sensitive

72Sport

Bronco Guru
Joined
Jul 8, 2002
Messages
2,954
A friend has a 72 with 33's and 1" body lift that his wife refuses to drive because the steering is too sensitive. He says he can turn the steering wheel lock to lock with one finger.

I am guessing that the pressure from the pump is too high. I had his pump apart years ago. At the time of installation it had a piston, the one that is just forward of the high pressure hose connection, with a .100" dia. bypass?? hole in the center of it. I measured the hole dia with the shank end of a numbered drill. Does the hole control the high pressure in the PS system? In my yard shopping days I grabbed several pistons with various diameter holes in the center and the springs to go with them. The springs appeared to be the same but I had no way of checking them or pressure gauges to check the system with the engine running.

Are the pistons in the Saginaw pumps interchangeable? Are they fitted or ground lapped to fit the pump body? What size by pass hole will work best with a near stock Bronco?
 

surfer-b

Contributor
Bronco Guru
Joined
Sep 7, 2006
Messages
3,013
Sounds more like the torsion bar in steering box/sector is bad/broken
 

68ford

Bronco Guru
Joined
Dec 26, 2004
Messages
2,710
http://www.gmtruckcentral.com/articles/2013/powersteeringmods/

That explains the purpose of internal parts. The hole you are referring to is responsible for the amount of flow, not pressure. There are lower pressure pistons avail. They're cheap. Hot rod guys use them when using mustang2 rack and pinions because the Saginaw pumps make to much pressure and flow I believe and the result is twitchy darty steering.
 
Top