• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Column to floor

OP
OP
R

RVZIO

Full Member
Joined
May 9, 2019
Messages
163
Loc.
New Smyrna Beach
Well just read a few thoughts and other responses from the forum I think I'll just keep it on the column for now. {plenty of other things to do. Never mind............................
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,124
Loc.
Cuchara, CO
That was a quick decision!!

I highly recommend the Duff floor shifter conversion. Pretty easy install. It's a bit easier if you have a 1 inch body lift. For me, its much more fun to drive with the floor shifter. Here's pics of 2 I've converted.
 

Attachments

  • tqeRgwAnRwKlWnYsEzEz4w.jpg
    tqeRgwAnRwKlWnYsEzEz4w.jpg
    103.1 KB · Views: 160
  • IMG_3888.jpg
    IMG_3888.jpg
    95.3 KB · Views: 166

Tiko433

Contributor
I know just enough to be dangerous
Joined
Jul 9, 2014
Messages
1,898
Loc.
Bolivia, North Carolina
X2 on Duffs 3speed floor. it’s a fun set up. I think there is one for sale on used parts. It really wakes up that 3speed
 

JGbronc

Contributor
Bronco Maniac
Joined
Mar 30, 2007
Messages
6,390
Loc.
Hytop, Alabama
I'll be the odd ball. I love the column shift and would prefer to rebuild/replace bushings. Plus you don't have to cut a big hole on the side of the tunnel.
 

amax

Jr. Member
Joined
Mar 10, 2014
Messages
119
I really liked the move from the column to the floor. My columns shift was in terrible shape though so you just had to hope that you had it going in the right direction to get it in gear. Moving to the floor made it more fun to drive to me and I wasn't getting hung up between gears
 

thegreatjustino

Contributor
Red Head Grease Monkey
Joined
Jan 23, 2002
Messages
16,291
Loc.
Stockton, CA
The column shift is just too cool old school. Of the six Broncos I have, four of them still have the column shift. I really want to convert one of them to a five speed, but don't want to remove the column shifter.

Anyone know how to build a five speed column shifter? :cool:
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
That was a quick decision!!

I highly recommend the Duff floor shifter conversion. Pretty easy install. It's a bit easier if you have a 1 inch body lift. For me, its much more fun to drive with the floor shifter. Here's pics of 2 I've converted.

lol, yes sir.. great product
 

Smedley

Sr. Member
Joined
Feb 28, 2004
Messages
928
Loc.
Snohomish
The column shift is just too cool old school. Of the six Broncos I have, four of them still have the column shift. I really want to convert one of them to a five speed, but don't want to remove the column shifter.

Anyone know how to build a five speed column shifter? :cool:

Agree. I love the column shift, just wish I had another gear or two.
 

oldiron

Bronco Guru
Joined
Jul 21, 2005
Messages
1,054
That was a quick decision!!

I highly recommend the Duff floor shifter conversion. Pretty easy install. It's a bit easier if you have a 1 inch body lift. For me, its much more fun to drive with the floor shifter. Here's pics of 2 I've converted.

Off topic, but I love those seats, what are they?
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,124
Loc.
Cuchara, CO
Off topic, but I love those seats, what are they?

65-66 Mustang Pony Interior upholstery - TMI Sport II with extra bolstering, new foam - on 67 Bronco seat frames and brackets. VERY comfortable and the extra bolstering is awesome. These are the most comfortable Bronco stock seats I have ever sat in. I sold this Bronco but I'm doing something similar in my 72 (the other pic). I have ordered TMI Sport II upholstery in a custom black with red stitching motif.
 

Attachments

  • IMG_1691.jpg
    IMG_1691.jpg
    60.8 KB · Views: 63

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,115
A lot of poor quality floor shift conversions have been done over the years. As bad as they were, they were still generally better than the completely wore out column shifter they replaced.

That being said, the parts to rebuild the column shifter exist today. I grew up with a few cars that were column shift. And when they work good, they are good. For a 3-speed I will take a column shift.

If you have to do a floor shift, Duff has the best kit. Not punching the dash going into 2nd (most every other brand of floor shift conversion will have you punching the dash to hit 2nd). The duff also has a better offset. Did the Duff 25 years ago and later found out I picked the good one. It was better than the wore out column, but still not as good as a good column shift.
 

1strodeo

Contributor
Squirrel Watcher
Joined
Sep 15, 2016
Messages
3,600
Loc.
Wisconsin
65-66 Mustang Pony Interior upholstery - TMI Sport II with extra bolstering, new foam - on 67 Bronco seat frames and brackets. VERY comfortable and the extra bolstering is awesome. These are the most comfortable Bronco stock seats I have ever sat in. I sold this Bronco but I'm doing something similar in my 72 (the other pic). I have ordered TMI Sport II upholstery in a custom black with red stitching motif.

very nice, yes I had those in my 66 Mustang and plan to redo my 66 Bronco seats the same way, but solid black. Would also like to add headrests from a late 60's Mustang, heard it's been done but not sure. I picked up a 66 rear bench from a local member with (probably) original black pony interior so it should match up nice ;)

ON topic, I agree leave the column shift alone, I would reserve cutting the floor for a 4- or 5-speed ;D
 

Attachments

  • IMG_0394.jpg
    IMG_0394.jpg
    128 KB · Views: 59

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,124
Loc.
Cuchara, CO
very nice, yes I had those in my 66 Mustang and plan to redo my 66 Bronco seats the same way, but solid black. Would also like to add headrests from a late 60's Mustang, heard it's been done but not sure. I picked up a 66 rear bench from a local member with (probably) original black pony interior so it should match up nice ;)

ON topic, I agree leave the column shift alone, I would reserve cutting the floor for a 4- or 5-speed ;D

Cool! The rear Bronco seat with Pony upholstery is extremely rare. In fact some folks say they don't exist! LOL

I highly recommend the Sport II upholstery and foam. The extra bolstering is awesome.
 

FordFarmer

Full Member
Joined
Jan 20, 2014
Messages
309
Three on the tree for me too. I was set on swapping in a 5 spd when I was Bronco shopping. After the drive home I changed my mind. Way too cool, way too fun. It also doubles as an anti-theft device. All the pedals and levers just confuse the idiots who steal cars ;)
 

ericwilkison

Jr. Member
Joined
Jul 27, 2011
Messages
116
Loc.
Portland
Would also like to add headrests from a late 60's Mustang, heard it's been done but not sure.

I added 69 mustang headrests to my stock seats several years ago. Ended up being a very easy bolt on upgrade as my seats already had the mounting holes in place. These were from a 73, not sure about earlier seats. The first pic (sorry for the poor quality) shows the two lower mounting holes inside the seat frame.
 

Attachments

  • 140118-IMG_20140118_095707275.jpg
    140118-IMG_20140118_095707275.jpg
    114 KB · Views: 45
  • IMG_20140130_150342314.jpg
    IMG_20140130_150342314.jpg
    78.6 KB · Views: 47

ep67bro

Contributor
Bronco Junky
Joined
Aug 28, 2008
Messages
3,873
Loc.
Easton, MD
If you do the floor shift conversion use the Duff kit it is by far the best. Did it on my 67 and it was soooo much nicer than the 3 on the tree. Yeah the 3 on the tree is cool but not all the great if it is all worn out. My 70 has a Hurst 3 speed floor conversion and it works fine but the offset isn't as good as the Duffs.

My 70 has head rest on the front seats they were added by the previous owner They look cool but don't really support my head as I am 6ft tall and the stock seat backs are so low. Don't have a pic, will try and post one tomorrow.
 

69_Sport

Full Member
Joined
Nov 5, 2014
Messages
286
+1 on the Duff floor shift conversion.

So much more fun to drive!

This and the power disc brake conversion are absolutely the best things I've done to the Bronco.
 
Top