Having problems finding GT40 push rod guide plates. '96 up GT40 heads are drilled and threaded for 5/16" studs that I have. The guide plates need a 5/16" stud hole size and a 5/16" push rod diameter. I can't find any at Jeg's or Summit.
I think this is what your are asking for factory pedestal mount rockers to roller rockers
PRODUCT DESCRIPTION
Crane Cams 36655-16 Pedestal Mount to Stud Mount Rocker Arm Conversion Kit for 1979-95 Mustang 5.0L
Why go through all that time , money and effort to end up with heads that make about 7hp more that stock heads. Now if you put a camshaft with a decent profile in the motor that requires some valve spring pressure you are going to rip that 5/16 hardware right out of the casting. They make some nice aluminum victor jr or afr heads these days that are fair priced and come ready to bolt on with nice size studs, guide plates and valve springs for a good size camshaft. Nice and easy , affordable and end up making some power you are actually going to feel when you are finished bolting them on.
I'm with you on that. But I already got slammed once in this thread. At this point I'll just step back and wait for the train wreck.
I'd like Mr. Walls to clarify. Why would a low RPM torque engine be a valve train wreck? . Apparently the hod rod mentality demands that high RPM/horse power has to be the only possible goal in engine building. Sad.






