• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Bouncing Amp Meter

1970 Palmer

Sr. Member
Joined
Mar 2, 2020
Messages
454
Likely the regulator, but it could also be a bad/poor ground. I would take a battery jumper cable and clamp it on the negative post and the other end on the engine and alternator to see if a better ground makes any improvement.

Does it still have the mechanical voltage regulator" We used to punch out the rivets on the cover and adjust them. Check for any tit's burned on the contact points.

John
 

66BlueGoose

Contributor
Sr. Member
Joined
Feb 6, 2014
Messages
408
I switched to the solid state version, all the bouncing went way. It seemed to be a function of the abruptness of the way mechanical ones turns on and off.
 

66CTBronco

Jr. Member
Joined
Nov 18, 2020
Messages
92
Loc.
New england
Normally the mechanical regulator buzzes smoothly if it’s adjusted properly.
I have an electronic regulator and I hate it. It makes the lights glow bright and dim and the ammeter fluctuates... ordering an electro mechanical regulator this weekend. Adjusting them is easy at least for me and I understand many do not feel the same way or have the same results. My 51 stude pickup and 52 farmall tractor both have old style two and three relay regulators and keep the voltage smooth and the battery charged properly... they’re finicky but if you understand them they are easy to maintain...not much smoke and magic or mirrors involved...
C
 

1970 Palmer

Sr. Member
Joined
Mar 2, 2020
Messages
454
Normally the mechanical regulator buzzes smoothly if it’s adjusted properly.
I have an electronic regulator and I hate it. It makes the lights glow bright and dim and the ammeter fluctuates... ordering an electro mechanical regulator this weekend. Adjusting them is easy at least for me and I understand many do not feel the same way or have the same results. My 51 stude pickup and 52 farmall tractor both have old style two and three relay regulators and keep the voltage smooth and the battery charged properly... they’re finicky but if you understand them they are easy to maintain...not much smoke and magic or mirrors involved...
C

Agree, they do seem to be temperature and magnetic sensitive. We removed the voltage regulator (two 3/8" screws), placed the rivet head over a slightly opened vise and punched out the rivet, flipped it around and punched out the other side rivet. Used a point file to remove the burnt tit on the points, then reinstalled the regulator without the cover installed. Fired it up let it warm up, and checked the voltage. Set the voltage to 14.3v, and installed the cover with two sheet metal screws. Checked the voltage again with the regulator cove installed. Some times you need to remove the cover and reset the voltage. Thinking it might have been magnetic sensitive.

In a perfect world, you would just replace the regulator, but then again were are seeing some pretty crappy aftermarket parts today, so it costs nothing to see it you can improve the fluctuation problem. If it still does not work, just replace it. The entire exercise is maybe 15 minutes.

John
 

66CTBronco

Jr. Member
Joined
Nov 18, 2020
Messages
92
Loc.
New england
I have two newer aftermarket regulators and though the craftsmanship isn’t quite what oem is, initial setup can be tricky with contact offset and spring tension to deal with... they have different functions and tightening the spring though it brings the contacts closer together does not provide the same function as actually moving the contacts closer together.
Looking at some offered by our vendors with the right stamping... little more expensive than the Pakistani or Turkish regulators but it’ll look right then!
C
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
I've got nothing against the old style regulators either, but it sounds like you got a bum electronic one that time. I've never had that issue with them, but frankly have only bought two in all these years! The last one being long before we started having all these "import issues" with most of our electronic stuff.

To Sunset Kid (welcome to classicbroncos by the way!) it could be an all-of-the-above thing at this point. Your '70 is old enough now, that whether it's bone stock, has been lightly modified or is a total custom, at this point there are several things that can cause your issue.
The good news is that one of the common issues (a bad ammeter) does not appear to be the problem since you also see flickering in the lights. So for now, we'll ignore the possibility that you may need a new gauge and work on the rest.

How long have you owned the Bronco? Do you know how old the alternator and regulator are? Do you know if your main wiring is original or has been replaced? Do you know if your battery cables are original, or have been replaced? Is the Bronco very rusty at all? Even just with surface rust?

Grounding issues always seem to come up, as mentioned already, so I'll put a few details that I can think of on the list.
Aside from defective/failing parts here's a few:
1. Does your alternator have a good clean connection to the engine?
2. Does your voltage regulator have a good clean connection to the body?
3. Is there still a good ground wire between the alternator and regulator? It's a small one that uses the original rubber strain-relief connection on the back of the alternator and runs up to one of the attaching screws of the regulator at the body. Check that to make sure it's good. If the original connector is gone, then it's gone too unless someone replaced it.
4. Is there still a good body ground directly from the battery negative? Not just the main one to the engine block, but one to the body.
5. Is the connection between the main ground cable and engine clean and tight?
6. Are the battery cables older, or brand new?
7. While we're on about grounds, it's a good practice to add a ground strap/jumper between the back of the engine and the firewall. The original body ground connection at the wheel well is not always sufficient any more. The years of rust and paint can have a huge effect on how it all works. Hence the additional ground to the body from the engine.
8. Speaking of paint... Has the body been painted? if so, you may just help a little bit by scraping some fresh paint off underneath the ground connections.
9. The general condition of the wiring is a big deal. Any connection that has anything at all to do with the charging system is suspect. Even if it's not suspect, it's a suspect.
10. Usually not a problem, but certainly worth checking the main connector in the Black w/yellow wire just behind the ammeter itself. Pull it apart and check for rust/corrosion and make sure it's good and tight fitting still.
11. While you're at this electrical sleuthing, remove all five fuses from the fuse panel, clean them, clean the contacts, then put them back in. This may not stop the pulsing, but it helps the overall health of the system. The glass fuses build up a layer of corrosion that you can't always see, so this cleaning should be done every few years. Or more often if you live in a moist, or salty environment.

The most common item to cause the flickering that I can think of is probably the bad regulator previously mentioned. But since bad connections and/or bad wires can do it too, you may have some deep digging to do before you fix yours.

Good luck!

Paul
 

ngsd

Contributor
Bronco Guru
Joined
Mar 2, 2019
Messages
2,702
make sure to tell us when you solve it so we can see what is was!
 
Top