I just posted this in my build thread but I might get a few more responses outside of that and I apologize for any repetitiveness.
I recently rebuilt my carb and adjusted it by ear to what I felt was pretty close. It ran good however the choke wasn't right and I just wasn't sure how accurate I got it so I asked a buddy to check it and set the choke up for me. I drove it over last night and when I cranked it he asked why my valves were so loud and proceeded to try and adjust them. They weren't bogging down or getting any quieter. Upon further inspection we noticed that the rocker is actually hitting the retainer on top of the spring which is why it is causing so much noise and not allowing for adjustment. I'm not really sure what is going on here and could use a little advice.The guy that assembled my heads obviously knew there was a problem because he ground on the rockers to try and clearance them. My buddy said he asked his local machine shop what they thought might be going on and they said probably the wrong valves? Check out the pics and let me know if you have any ideas.
I recently rebuilt my carb and adjusted it by ear to what I felt was pretty close. It ran good however the choke wasn't right and I just wasn't sure how accurate I got it so I asked a buddy to check it and set the choke up for me. I drove it over last night and when I cranked it he asked why my valves were so loud and proceeded to try and adjust them. They weren't bogging down or getting any quieter. Upon further inspection we noticed that the rocker is actually hitting the retainer on top of the spring which is why it is causing so much noise and not allowing for adjustment. I'm not really sure what is going on here and could use a little advice.The guy that assembled my heads obviously knew there was a problem because he ground on the rockers to try and clearance them. My buddy said he asked his local machine shop what they thought might be going on and they said probably the wrong valves? Check out the pics and let me know if you have any ideas.











