I have to get new shocks. Looking at my side profile, my 47 year old coils need replacement as well. The "nose" is down more than I like. I don't know the point of reference most used but I'm thinking a starting point guide would be a straight line across the length of the bed, extending the line out past the front bumper. I installed a One inch body lift, just replaced the rear leaf springs with "stock" Wild Horses 10 leaf pack. I have 235 75 15 All Terrains. From the side profile I haven't done the string line but I measured 46 inches at the front axle and 50 inches at the rear axle. All that said, I wish the space between the top of my rear axle tires and the uncut fenders was back to the stockish distance of one inch instead of the after l1 inch body lift distance of 2 1/4 inches. I hear of some removing a leaf spring(which one?), but don't know what the total consequences would be. Bottom line - stock rear tire clearance of about an inch, get rid of the front end raked look. Side note; I need shocks to drive the Bronco. Likely going to cost me, bottom line, $500 for Bilsteins 51"s. I need the shocks today but I don't want to throw them away when I change the spring heights some time within the next year when I have time. Any thoughts? Thanks, John B











