• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

What have you done to your Bronco today?

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
moved it tonight so I could mow under it..
Sure nice to have it running again. I'll bet it's sat there for maybe 2 weeks &. fired right off..
Nice to have it back on it's feet.
 

FordBronc

Contributor
Bronco's, yea I have a couple.
Joined
Dec 26, 2010
Messages
1,518
Loc.
Polk County, Missouri
Finally got it out from under the carport on its own power, sadly it has been there since Thanksgiving getting slow paced repairs. Yes REAL slow paced. Now to get back to more welding repair since I can get it over the the shop where the welder is.
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
Finally got it out from under the carport on its own power, sadly it has been there since Thanksgiving getting slow paced repairs. Yes REAL slow paced. Now to get back to more welding repair since I can get it over the the shop where the welder is.

Happens to the best of us hoss...
 

FordBronc

Contributor
Bronco's, yea I have a couple.
Joined
Dec 26, 2010
Messages
1,518
Loc.
Polk County, Missouri
I am trying to get MINE and the son in laws repaired to make SMORR on the 16/17/18 July....

Will not be able to make the Spare Parts run this coming weekend. :(
 

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
21,707
Loc.
NH
STARTED plugging my engine harness in and installed 02 sensors...rerouted the fuel lines for my build rig
 

amfw

Sr. Member
Joined
Nov 10, 2008
Messages
522
Made some progress on my soft door project. I thought I had abandoned it but I scored some uppers, and it just so happens I had left the project at a pretty complete place for the lowers, so it's just a little more fitment and an interior trim panel and we are there :)
 

Attachments

  • F826108B-4119-4C75-9EB5-4DA8034B6BDB.jpg
    F826108B-4119-4C75-9EB5-4DA8034B6BDB.jpg
    94.4 KB · Views: 71
  • 516F39BB-A2B1-4610-93D6-4BCB57699304.jpg
    516F39BB-A2B1-4610-93D6-4BCB57699304.jpg
    94.7 KB · Views: 73

FordBronc

Contributor
Bronco's, yea I have a couple.
Joined
Dec 26, 2010
Messages
1,518
Loc.
Polk County, Missouri
Welded up a broken leaf spring hanger, just the outer tab...NO worries it is a trailer and trail rig only. And it is 4 linked in the back and has a cantilever set up (poorly excited by the PO).

Also relocated the roll cage door bars just a little lower, to be more user friendly to work with the new seats.

No I am not posting a pic of the leaf spring hanger repair job neither. Once again is does not look like a stack of dimes fell over evenly, so no pic. Lol

The plan is to replace it all with proper cantilever leaf spring axle mounts. I am just trying to get it to make one more trip to SMORR mid July.
 

Attachments

  • spring.jpg
    spring.jpg
    21.5 KB · Views: 119
  • bk1.jpg
    bk1.jpg
    64.6 KB · Views: 115
  • db1.jpg
    db1.jpg
    83.2 KB · Views: 111
  • db2.jpg
    db2.jpg
    82.5 KB · Views: 78
  • 25.jpg
    25.jpg
    84.8 KB · Views: 83
  • 13.jpg
    13.jpg
    45 KB · Views: 80
  • 12.jpg
    12.jpg
    46 KB · Views: 88
Last edited:

Hinmaton

Sr. Member
Joined
Oct 17, 2017
Messages
605
Welded up a broken leaf spring hanger, just the outer tab...NO worries it is a trailer and trail rig only. And it is 4 linked in the back and has a cantilever set up (poorly excited by the PO).

Also relocated the roll cage door bars just a little lower, to be more user friendly to work with the new seats.

No I am not posting a pic of the leaf spring hanger repair job neither. Once again is does not look like a stack of dimes fell over evenly, so no pic. Lol

The plan is to replace it all with proper cantilever leaf spring axle mounts. I am just trying to get it to make one more trip to SMORR mid July.


So, it broke at the axle hanger? I kinda dig the setup. How is the mid perch attached? Is it sitting on an angle bracket or some sort?

Hinmaton


Sent from my iPhone using Tapatalk
 

BroncoJimbo

Contributor
Long-term owner
Joined
Jun 11, 2014
Messages
291
Loc.
North GA
Installed a new radiator. Did some research and although I can buy a cheap, no name, 3 core, aluminum radiator on eBay I bought a Champion radiator instead from Jegs. $256 delivered and it really is a thing of beauty. I hope it lasts longer than the last aluminum radiator I tried.
 

Attachments

  • IMG_1820.jpg
    IMG_1820.jpg
    135.9 KB · Views: 103

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
Dang.... :(

Welded up a broken leaf spring hanger, just the outer tab...NO worries it is a trailer and trail rig only. And it is 4 linked in the back and has a cantilever set up (poorly excited by the PO).

Also relocated the roll cage door bars just a little lower, to be more user friendly to work with the new seats.

No I am not posting a pic of the leaf spring hanger repair job neither. Once again is does not look like a stack of dimes fell over evenly, so no pic. Lol

The plan is to replace it all with proper cantilever leaf spring axle mounts. I am just trying to get it to make one more trip to SMORR mid July.
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
Made some progress on my soft door project. I thought I had abandoned it but I scored some uppers, and it just so happens I had left the project at a pretty complete place for the lowers, so it's just a little more fitment and an interior trim panel and we are there :)

I see the finish line... :)
 

FordBronc

Contributor
Bronco's, yea I have a couple.
Joined
Dec 26, 2010
Messages
1,518
Loc.
Polk County, Missouri
So, it broke at the axle hanger? I kinda dig the setup. How is the mid perch attached? Is it sitting on an angle bracket or some sort? Hinmaton

Yes that have some flat plates u bolted to the axle and then it is like they cut off the original rear spring hanger and flipped it, and then welded it (each side) to the top of the plate. One of those welds broke.

I believe that used some longer leaf springs (mounted upside down) in the original front hangers. And that pushed the wheel base back. And yes then some angle iron welded to the frame for stop "UP" points.

It is a sort of a 1/2 arse PO rear 4 link, cantilever set up. An almost hodgepodged together deal. But it works and flex's great. The limit straps need repositioned.

Yes I know that 4 link should NOT be 2 and 2 on single mounts points. NOT MY DESIGN, shut your flame throwers off. Lol
 

Attachments

  • 20.jpg
    20.jpg
    98.2 KB · Views: 87
  • 19.jpg
    19.jpg
    119.3 KB · Views: 92
  • 14.jpg
    14.jpg
    70 KB · Views: 94
  • 13.jpg
    13.jpg
    68.8 KB · Views: 93
  • under 1.jpg
    under 1.jpg
    107.3 KB · Views: 96

76YETI

Contributor
Sr. Member
Joined
May 27, 2015
Messages
932
Loc.
KC METRO
Drove her home! Just got her rewired EVERYTHING WORKS!, intermittent wipers, new p/s pump, switched out stupid loud fuel pump for aeromotive pump (nice and quite). Its Pouring in KC…did I mention the intermittent wipers! Thanks to Ed @ Edge Restorations! If you need work done on ur bronco in/around KC …..Ed is your guy!
 

Boss Hugg

Contributor
Bronco Guru
Joined
Jun 8, 2010
Messages
2,213
I made an attempt to compete with Spareparts today.

d43bd8a289b58633c516782c2afba965.jpg


And the other day, I added shoulder belt hangers(?) to my SpareParts cage. Now the kids are finally tied in safely! And it fits perfectly for adults who want to chance folding their legs up in the back seats.

d82d6b5457de5460e18c12bc5cb09807.jpg



dd44a3d16bc8eb8ca5900896329a5d8e.jpg



Sent from my iPhone using Tapatalk
 

No Hay

Bronco Guru
Joined
Jun 4, 2014
Messages
1,657
I put the top back on. I'm thinking of selling the Bronco. I'll put some pics and details in the "for sale" section tomorrow mid day.
 

Attachments

  • IMG_3937.jpg
    IMG_3937.jpg
    118.4 KB · Views: 72

brncofinatic

Jr. Member
Joined
Dec 8, 2004
Messages
116
nothing today, but ordered what I need to hopefully get it fired up this weekend after 14 years in the shop. yes 14 is accurate, many non believers but this 4 day weekend coming up may make some believers, cant wait to pull it out of the shop (even if it has the little tires on it) varrrrrroooom!
 

FordBronc

Contributor
Bronco's, yea I have a couple.
Joined
Dec 26, 2010
Messages
1,518
Loc.
Polk County, Missouri
Picked up the bearing I needed for the steering box sector shaft (top part). To work with the new thicker and heavy duty 4 bolt cap I got, installed it all right afterwards.

That cap is also drilled and tapped (like the front cap) and hope to get the complete steering box installed tomorrow.

Going to have to do a flex/compress ck of the front end so I can measure for the lines for the hyd assist.
 

FordBronc

Contributor
Bronco's, yea I have a couple.
Joined
Dec 26, 2010
Messages
1,518
Loc.
Polk County, Missouri
So the new cap for the front of the steering box, required me to cut out a piece of the core support. Body saw time and modify my blue brace for what will soon be a new hyd assist line on the top and the end of the box.

So now the steering box is installed, both braces (Duffs and Blue) back on. Lines connected and its bleed.

Leak check complete. On to the pitman arm....

FYI yes that is a AGR top cap and NO I did not get it from them or have them do anything to the box. DIY4X for the front cap.
 

Attachments

  • pse.jpg
    pse.jpg
    49.5 KB · Views: 89
  • psd.jpg
    psd.jpg
    46.9 KB · Views: 99
  • psc.jpg
    psc.jpg
    68.9 KB · Views: 93
  • psb.jpg
    psb.jpg
    54 KB · Views: 116
  • psa.jpg
    psa.jpg
    66.5 KB · Views: 141
  • psf.jpg
    psf.jpg
    51.6 KB · Views: 94
Last edited:
Top