• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

BAT Craziness

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
Holy Cross(members)!

That is a serious drop crossmember. And when it wasn't enough, cut and drop it some more. That powertrain is really sunk into the chassis, way too deep.

As much as I am guilty of cobbling a crossmember together out of straight sticks, for a build like this there really should have been a crossmember made from a bent piece of tube. Quit trying to recycle the late model crossmember that was butcher upon butchery.

But it is pretty.
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
Holy Cross(members)!

That is a serious drop crossmember. And when it wasn't enough, cut and drop it some more. That powertrain is really sunk into the chassis, way too deep.

As much as I am guilty of cobbling a crossmember together out of straight sticks, for a build like this there really should have been a crossmember made from a bent piece of tube. Quit trying to recycle the late model crossmember that was butcher upon butchery.

But it is pretty.

I really bit my tongue on this one with the comments online - only commented on the crossmembers, like you did.

I don't even think it's pretty - the whole build suffers a lot in the aesthetics department - just my opinion.

Todd Z.
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
The Cal Creations Bronco just got posted! Saw this at Barrett in 2019 when it sold for $148K including fees. Im guessing $175K

https://bringatrailer.com/listing/1966-ford-bronco-68/

1966_ford_bronco_163327406601488963abaIMG_9181.jpg

That poor truck can't seem to find a good home!

Todd Z.
 

Jakedog

Bronco Guru
Joined
Jan 25, 2010
Messages
1,010
I dont think many here would even consider this a Bronco. Custom tube frame with an independent front end that looks piecemealed together. Love the supercharged coyote and some of the custom touches but where does 77 Bronco even come from, the glovebook door? It even says replacement Dennis Carpenter panels

Reserve met at $85K somehow. He's gotta have $65K into it at least

https://bringatrailer.com/listing/1977-ford-bronco-64/

1977_ford_bronco_16345225818764da1977_ford_bronco_1634522580d208495dadbf8064-a822-44b7-adab-441bc77ab839-eQN2rM-scaled.jpg


1977_ford_bronco_1634522575ff9f98764da1977_ford_bronco_1634522574ff9f98764dae8a3f9e8-da5f-4275-8348-d85b9dde6266-dZwHxr-scaled.jpg

This thing looks like a major pos underneath. Is that even a bronco frame?
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
I think that is one of the problems. They did keep the bronco frame and grafted too much onto it.
 
OP
OP
ngsd

ngsd

Contributor
Bronco Guru
Joined
Mar 2, 2019
Messages
2,702
I would not have a lot of confidence driving that. It just looks scary.
 

rguest3

Bronco Guru
Joined
Dec 13, 2012
Messages
3,780
That's one hell of a Transmission Crossmember!

There is A LOT going on there! No thanks.
 

hunter1

Contributor
Sr. Member
Joined
Feb 2, 2013
Messages
522
Loc.
Maryville, Tn
What's going on with the left front control arm support? looks like the have a block behind it to space it out at the bottom crossmember? Not sure what this was designed after, but would it be offset from pass side to driver side for a reason? Or were they doing it for alignment issues. Looks like a cobbled-up mess to me.
 
OP
OP
ngsd

ngsd

Contributor
Bronco Guru
Joined
Mar 2, 2019
Messages
2,702
I really bit my tongue on this one with the comments online - only commented on the crossmembers, like you did.

I don't even think it's pretty - the whole build suffers a lot in the aesthetics department - just my opinion.

Todd Z.

And it still brought 97k plus fees. BAT for the win!
 

JefeAZ

Bronco Guru
Joined
Aug 23, 2011
Messages
3,088
Loc.
Tucson
I think that is one of the problems. They did keep the bronco frame and grafted too much onto it.
The owner said it was a custom built frame. You can see the front portion in the walk around video and it gets scary thin under the drivers seat. I think the only thing original was the tub and glovebook door

HWZpCqv.jpg
 

Jakedog

Bronco Guru
Joined
Jan 25, 2010
Messages
1,010
It makes me wonder if they're just modifying a newer f-150 frame to fit the bronco body. It looks like it has a 9.75" ford rear axle.
Instead of building a nice 9" they can just use a wrecking yard 9.75 and clean and paint it. I might be wrong but the axle looks full width.

It would be a way to make a custom bronco fairly cheap and quick, and then sell it for a nice profit.
With nice custom builds going for $200k+ these guys might be taking advantage of the market and people.
Just my 2 cents.
 
OP
OP
ngsd

ngsd

Contributor
Bronco Guru
Joined
Mar 2, 2019
Messages
2,702
I was wondering if the color would hold this back or not. Well at 210k, it seems like it did very well but would it have gone for more? hard to say but the winning bidder sure must have liked the color. It was a beautiful build, just not my taste.
 

Attachments

  • green coyote.jpg
    green coyote.jpg
    143.2 KB · Views: 112

Howard2x4x4

Contributor
Bronco Guru
Joined
Apr 19, 2014
Messages
2,474
I was wondering if the color would hold this back or not. Well at 210k, it seems like it did very well but would it have gone for more? hard to say but the winning bidder sure must have liked the color. It was a beautiful build, just not my taste.

I'm sure it would fit in my garage; my wallet, not so much.
 

Mark1911

Full Member
Joined
May 14, 2017
Messages
174
I was wondering if the color would hold this back or not. Well at 210k, it seems like it did very well but would it have gone for more? hard to say but the winning bidder sure must have liked the color. It was a beautiful build, just not my taste.

At 210k, starting to get into ICON money. At least with ICON you get so much more than that green build had to offer.
I'm just saying..........


Mark
 
OP
OP
ngsd

ngsd

Contributor
Bronco Guru
Joined
Mar 2, 2019
Messages
2,702
At 150 it was about the same as before.
 
OP
OP
ngsd

ngsd

Contributor
Bronco Guru
Joined
Mar 2, 2019
Messages
2,702
This Coyote is a nice one. I am still amazed at how much more the Coyote builds bring over a nicely built 302. I have one nearly identical (pictured) to this one that I am finishing that has a killer 331 injected motor that will match the coyote in performance but will probably sell for about half what this one will. Do people really feel they get that much more for the money with a late model drivetrain?

 

Attachments

  • 68gray.jpg
    68gray.jpg
    155.7 KB · Views: 77
  • 68gray int.jpg
    68gray int.jpg
    179.8 KB · Views: 80

JefeAZ

Bronco Guru
Joined
Aug 23, 2011
Messages
3,088
Loc.
Tucson
I guess modern reliability and availability of parts/upgrades is worth paying an extra $25-75K

That one is begging for some Duffy bumper mounts
 

JaxLax

Bronco Guru
Joined
Apr 22, 2002
Messages
3,310
Loc.
Jacksonville, FL
Do people really feel they get that much more for the money with a late model drivetrain?

For people who don't know how to fix vehicles? Yes.
The mechanics who can do real, solid work on non-EFI engines are retiring and leaving the shops.
If you don't plan to personally maintain it - the EFI swap and OBDII codes and etc are going to be necessary for you to have it reliably serviced.

Actually one of the things that was most shocking/every custom builder should be doing was Icon (from a video they did) showed that they deliver a full wiring diagram and layout schematic on a USB drive for all of their vehicles. When thinking about the THREE separate kill switches I have found (so far) on my Ginger 77 - how effective and useful that would be is inconceivable at times when tracing problems/wires. Also the fact that they must have gotten a deal on 500' of black 12ga since EVERY WIRE EVENTUALLY SPLICED WITH IT.
 

BruiserOutdoors

Bronco Guru
Joined
Aug 22, 2013
Messages
1,030
I cant believe the price on this one.... check out pic 226. really?


 
Top