• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

BroncoBub Build

OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
I was bored today. So, this is what I did....
 

Attachments

  • 20210310_113537.jpg
    20210310_113537.jpg
    152.8 KB · Views: 121
  • IMG_0856test (2).jpg
    IMG_0856test (2).jpg
    134 KB · Views: 122
  • IMG_0856test large.jpg
    IMG_0856test large.jpg
    126.3 KB · Views: 124
Last edited:

Howard2x4x4

Contributor
Bronco Guru
Joined
Apr 19, 2014
Messages
2,474
Instead of using the pre-bent c4 cooler lines I went with a custom more of a straight line to the radiator with 90 dg fittings. I also plan on creating something similar for the gas lines. I can't take credit for this as I watched a youtube video from Jason&Jonie Builds they created the lines for there trans.

Bub

Way, way spiffy Bub! Wonderful attention to detail on the springs cleanup also!
 
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
Not much going on lately. Had to fix a leaky oil pan gasket (one piece). That's done. Decided to go a different route with the fuel lines. Before I was going with aluminum now I changed out to Evil Energy PTFE braided black lines. Almost done with those. I plan on test fitting the body to the frame in the near future. This weekend hopefully. Than Take it off again and paint inside the engine compartment factory color code S. I was going to color raptor line but since decided against it. Going with factory color base coat clear coat.
Unless of course I change my mind before than...

Bub
 

Attachments

  • IMG_0968.JPG
    IMG_0968.JPG
    79.2 KB · Views: 136
  • IMG_0966.JPG
    IMG_0966.JPG
    240.7 KB · Views: 117
  • IMG_0965.JPG
    IMG_0965.JPG
    238.7 KB · Views: 122
  • IMG_0964.JPG
    IMG_0964.JPG
    199.6 KB · Views: 126
  • IMG_0969.jpg
    IMG_0969.jpg
    98.2 KB · Views: 138

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
We forgive you.. It is that time of year for the garage projects though :) lol keep doing what you can when you can brother
 
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
Talking with my body shop/paint supplier about primers and stuff and told him I had new quarter panels and fenders that were e-coated with black. He said to just scuff them and shoot primers over them. I started scuffing them and came across some surface rust under the e-coat. Since I found these spot on different parts of the first quarter panel, I decide to take them down to bare metal and start over with fresh epoxy primer. Just a heads up if your thinking about by passing sanding down to bare metal these e-coated panels. These quarter/fenders came from Dennis Carpenters.

Bub
 

Attachments

  • IMG_1049.JPG
    IMG_1049.JPG
    191.8 KB · Views: 80
  • IMG_1047.JPG
    IMG_1047.JPG
    312.1 KB · Views: 82
  • IMG_1048.JPG
    IMG_1048.JPG
    185.1 KB · Views: 73
  • IMG_1041.JPG
    IMG_1041.JPG
    332.8 KB · Views: 75
  • IMG_1043 (2).JPG
    IMG_1043 (2).JPG
    301.7 KB · Views: 73
  • IMG_1045.JPG
    IMG_1045.JPG
    203.6 KB · Views: 83

jmhend

Bronco Guru
Joined
Dec 25, 2007
Messages
2,768
Talking with my body shop/paint supplier about primers and stuff and told him I had new quarter panels and fenders that were e-coated with black. He said to just scuff them and shoot primers over them. I started scuffing them and came across some surface rust under the e-coat. Since I found these spot on different parts of the first quarter panel, I decide to take them down to bare metal and start over with fresh epoxy primer. Just a heads up if your thinking about by passing sanding down to bare metal these e-coated panels. These quarter/fenders came from Dennis Carpenters.

Bub
What a bummer. What are you using to strip the e-coat with? Orbital with 80 grit or something else?

Sent from my SM-N960U using Tapatalk
 
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
Grunt work started. Epoxy primer soon!
 

Attachments

  • IMG_1061.JPG
    IMG_1061.JPG
    204.1 KB · Views: 75
  • IMG_1062.JPG
    IMG_1062.JPG
    210.5 KB · Views: 75
  • IMG_1063.JPG
    IMG_1063.JPG
    245 KB · Views: 86

jmhend

Bronco Guru
Joined
Dec 25, 2007
Messages
2,768
The body work looks great, Bub! Rest up and feel better.
Agreed, motivation after COVID can be lacking as well as I hear. Be safe and a speedy / safe recovery.

Sent from my SM-N960U using Tapatalk
 
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
Agreed, motivation after COVID can be lacking as well as I hear. Be safe and a speedy / safe recovery.

Sent from my SM-N960U using Tapatalk
Thanks very much, I can't lift my head up and stand for very long. I'll get through it, Thanks Again
 
Top