Good job brother..
Instead of using the pre-bent c4 cooler lines I went with a custom more of a straight line to the radiator with 90 dg fittings. I also plan on creating something similar for the gas lines. I can't take credit for this as I watched a youtube video from Jason&Jonie Builds they created the lines for there trans.
Bub
Way, way spiffy Bub! Wonderful attention to detail on the springs cleanup also!
What a bummer. What are you using to strip the e-coat with? Orbital with 80 grit or something else?Talking with my body shop/paint supplier about primers and stuff and told him I had new quarter panels and fenders that were e-coated with black. He said to just scuff them and shoot primers over them. I started scuffing them and came across some surface rust under the e-coat. Since I found these spot on different parts of the first quarter panel, I decide to take them down to bare metal and start over with fresh epoxy primer. Just a heads up if your thinking about by passing sanding down to bare metal these e-coated panels. These quarter/fenders came from Dennis Carpenters.
Bub
Yes 80 gritWhat a bummer. What are you using to strip the e-coat with? Orbital with 80 grit or something else?
Sent from my SM-N960U using Tapatalk
Grunt work started. Epoxy primer soon!
Thanks - Music and heat already on!!!Looks great. I will need to do the exact same thing soon. Put on the heat and good music…. For hours!!!!!
Sent from my iPhone using Tapatalk
Appreciate it!!That sucks, hope you get over it OK.
Thanks chuckybThe body work looks great, Bub! Rest up and feel better.
Agreed, motivation after COVID can be lacking as well as I hear. Be safe and a speedy / safe recovery.The body work looks great, Bub! Rest up and feel better.
Thanks very much, I can't lift my head up and stand for very long. I'll get through it, Thanks AgainAgreed, motivation after COVID can be lacking as well as I hear. Be safe and a speedy / safe recovery.
Sent from my SM-N960U using Tapatalk






