Bronco6684
New Member
- Joined
- Jul 20, 2022
- Messages
- 13
Hi, building a 76 Bronco from the frame up.
I have purchased a 5.0 Explorer Motor. The Bronco has stock 3:50 Gears, with 33" tires, would I be better ahead to go with the original plan of mating it to a AX15, (I have The AX15 but would need the conversion kit), or would it make sense to mate it to the C4 Auto (I have everything for that but tranny would need to be rebuilt). One of my issues is with the Explorer 5.0 I wouldn't have a transmission kickdown? I could lose the fuel injection and run a 4 barrel. (I have a new intake but would need a new carb).
Any extra pieces could be saved for another build
All advice would be appreciated
I have purchased a 5.0 Explorer Motor. The Bronco has stock 3:50 Gears, with 33" tires, would I be better ahead to go with the original plan of mating it to a AX15, (I have The AX15 but would need the conversion kit), or would it make sense to mate it to the C4 Auto (I have everything for that but tranny would need to be rebuilt). One of my issues is with the Explorer 5.0 I wouldn't have a transmission kickdown? I could lose the fuel injection and run a 4 barrel. (I have a new intake but would need a new carb).
Any extra pieces could be saved for another build
All advice would be appreciated











