• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Drivetrain Noise

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
Need some help diagnosing a new noise. 95% of the time it only happens when off throttle and in gear. I think I heard it once or twice while decelerating and out of gear.

It sounds like a rattle or clank coming from the transmission / transfer case area. I pulled the rear driveshaft and drove it in 4wHi and the noise went away completely.

The u joints in the double cardan seem tight as well as the rear u joint.

Rear diff has about 500 miles on it all new bearings gears etc. jacked up the rear and spun the tires. I didn’t feel anything abnormal.

Could it just be something in the double cardan? Or maybe something on the output of the transfer case?
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Which transmission and transfer case do you have?
Yes it can be something in the double cardan, because the centering ball is also part of the equation. Even if it feels good it could be giving a little trouble.
Other than that, is this also a lifted Bronco?
What about the correct rear pinion angle?
 
OP
OP
Okie69

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
Which transmission and transfer case do you have?
Yes it can be something in the double cardan, because the centering ball is also part of the equation. Even if it feels good it could be giving a little trouble.
Other than that, is this also a lifted Bronco?
What about the correct rear pinion angle?
Stock manual / d20. 2.5 lift. If I put pressure on the double cardan and move it back and forth I can kind of recreate the sound. I went ahead and ordered the rebuild kit for it from y’all.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Great, thanks! Hope that takes care of the noise.
Is it a vibration too? Or just a noise? And is the noise momentary like a clunk, or continuous like a grinding sound?
Sounds like you’re dealing more with a clunk or a click. Is that right?
 
OP
OP
Okie69

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
Almost a rattle / clank that lasts for the amount of time I’m decelerating with the engine. Hopefully that makes sense. No noise decelerating in neutral. Seems to me like the reverse load on the double cardan is what’s making the noise.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Could be things in the shaft flopping around, but don’t neglect checking things like the output yoke on the transfer case and yoke on the differential either.
That’s not a common sound on Broncos so check everything.
Even the simple things like a parking brake cable hanging too close to some thing like the driveshaft or an exhaust tube.
 

brewchief

Sr. Member
Joined
Feb 11, 2007
Messages
877
I had a rattle like that in my front shaft, I replaced the u joints and centering ball assembly and it feels much tighter, I haven't gotton a chance to run it and see if it's fixed but judging by how much tighter the cv end is I suspect it's good to go.

Sent from my SM-T510 using Tapatalk
 
OP
OP
Okie69

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
Wanted to circle back around to this in case it comes up in any future searches.

It was the rear double cardan joint. When I removed the driveshaft I could feel that the joint was loose and sloppy. Replaced it and all is good. I narrowed it down by removing the rear driveshaft and driving around with just the front axle.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Very cool! Thanks for the follow up.
Glad it turned out to be that because if you hadn’t found it and fixed it likely it would’ve caused a lot of trouble later.
And then we can add this noise and symptoms to the long list of funny things that happen when a double cardan starts to go out.
I’ve had or been involved with probably 10 failing double Cardan set ups, and not one of them sounded or felt the same.
Some were weird noises, some were vibrations, some were both. And then there was the one that gave no heads up at all before it shot shrapnel through the floor between the seats and dented the roof.😱
But not one was the same.
 
Top