• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Wiper pivot drum diameter

RustyDusty

New Member
Joined
Aug 25, 2024
Messages
3
Hi all,

I joined the forum even though I am not a Bronco owner (Wagoneer actually (don't hate!)) and need some help with my wipers (you guys discuss wipers more than any other forum I can find!)

Is the Bronco wiper pivot drum 1/2 or 5/8 diameter on early Broncos? I ask because I think I can use Bronco arms and 52 F100 pivots (1/2 in) parts to piece together a rear wiper for my Wag. Thanks for any help.

Russ
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Interesting reversal! Welcome to the forums!
I don’t know the answer, but I do know that one of the swaps we do is the XJ Cherokee rear wiper to the front of the Broncos.
So if you know that diameter, that might get you started.
 
OP
OP
R

RustyDusty

New Member
Joined
Aug 25, 2024
Messages
3
I have seen that also, but the 12 in would work for me, and the stainless wiper arms that Broncos have available appeal to me. You guys also have way more parts available given the sales figures...and the fact that AMC went out of business almost 40 years ago.
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
I *think* the Bronco pieces are 1/2". I haven't had stock EB wiper shafts on mine since the mid '80s, but I have had, surprisingly (I think) Wagoneer shafts/pivots on mine since then, and they're 5/8" knurl diameter. I decided to replace the wiper arms on mine a few years ago and started researching things and realized mine were different than a standard Bronco's. I ended up finding 5/8" knurl arms at Newport Engineering. The Bronco pieces are smaller so I'm assuming they're 1/2".

Todd Z.
 
OP
OP
R

RustyDusty

New Member
Joined
Aug 25, 2024
Messages
3
I *think* the Bronco pieces are 1/2". I haven't had stock EB wiper shafts on mine since the mid '80s, but I have had, surprisingly (I think) Wagoneer shafts/pivots on mine since then, and they're 5/8" knurl diameter. I decided to replace the wiper arms on mine a few years ago and started researching things and realized mine were different than a standard Bronco's. I ended up finding 5/8" knurl arms at Newport Engineering. The Bronco pieces are smaller so I'm assuming they're 1/2".

Todd Z.
Thank you for the confirmation. The pivots I have are for an F100 flat windshield, as the angles will match the Wag's tailgate. The upside down wipers of the Bronco will work when flipped to a bottom orientation. That is the plan anyway. Thanks for the help.
 
Top