Top of the springs is their heavy duty plate used in conjunction with the axle relocation plate. You can move the axle back 1" or 1.25" with this. I went with 1.25". I have the torque tamer and will install it after a couple hundred miles. Duff recommended letting the springs break in before mounting it. I also got to mount the rear sway still. The parking brake cables that came with the kit I am not going to use. I want to run them between the frame rail and body, so I need longer. Found an old thread on here that mentioned 72 F100 cables with part numbers, so I ordered those from Rock Auto.Is that a torque tamer bracket?
Make sure the truck is on the ground when you locate the tamer bracket. My mechanic did it on the lift do now I have to have it cut off and new one welded.Top of the springs is their heavy duty plate used in conjunction with the axle relocation plate. You can move the axle back 1" or 1.25" with this. I went with 1.25". I have the torque tamer and will install it after a couple hundred miles. Duff recommended letting the springs break in before mounting it. I also got to mount the rear sway still. The parking brake cables that came with the kit I am not going to use. I want to run them between the frame rail and body, so I need longer. Found an old thread on here that mentioned 72 F100 cables with part numbers, so I ordered those from Rock Auto.
Rewire work is usually a royal PITA. Good luck on your project. Get a six-pack of this to help you.small step for me, a HUGE step for mankind! (no catastrophic fire) Between the glass tub and 18lbs. of bad wiring cut out...should go pretty good now
At 8%, that is a right proper beer! I wouldn't be getting much of anything done after 6 of those!Rewire work is usually a royal PITA. Good luck on your project. Get a six-pack of this to help you.
View attachment 945100
Probably the best advice I've seen on this forumRewire work is usually a royal PITA. Good luck on your project. Get a six-pack of this to help you.
View attachment 945100
@tasker since you're in NH, you may be able to get yourself some Nightshift Brewing 87 out of Boston...I believe they only come in pint cans tooAt 8%, that is a right proper beer! I wouldn't be getting much of anything done after 6 of those!
Picked up my interior panels from powder coating. Now I just need to paint my tub and put it all back together.![]()
![]()
Sent from my iPhone using Tapatalk
What color code did you use? Looks great!
Are those door panels aluminum?Picked up my interior panels from powder coating. Now I just need to paint my tub and put it all back together.![]()
![]()
Sent from my iPhone using Tapatalk
Is that to match parchment or wimbledon?I used Cardinal powder T009 BG-01 Almond as recommended by Doug @904Bronco
It’s a satin finish.
Sent from my iPhone using Tapatalk






