Steve83
Bronco Guru
It isn't true ANY of the time - not even at full pressure. You're over-simplifying the issue, which is why real-world experiences (like the taxi example) don't agree with your idealized theory....the tire never slips on the ground. This isn't real ALL of the time...
This is CORRECT. Normal road/highway tires (including ATs & most mud tires) have woven steel belts in the tread, which absolutely prevent them from expanding due to air pressure. That's why they can tolerate 40-100psi, and wide temperature ranges.Tires do this when they're going straight. They slip/scrub slightly due to compression. The distance of an arc is longer than the distance of a line and the tire is traveling along a line at the contact patch. ... It does it by compressing the tread (and thus shortening the overall circumference) along the contact patch.
But those belts do NOT prevent them from compressing (something a cast-Iron track can't do), which makes them SHORTER - by a very small amount for a very brief time, but all those compressions add up because a 33" tire makes about 800 revs per mile. So if it only compressed 1/16" per rev (which is MUCH less than reality), that would be 4 feet lost per mile.
Here's another way to check it yourself (anyone):
Measure your newest tire's actual circumference off the ground using the thinnest most-flexible tape measure you can get (like a fabric tape, or the paper kind that Ikea gives out free - it has to be ~10' long). Then do the math of how many revs that would make per mile. Then look up the manufacturer's published RevsPerMile for that exact model & size tire - I bet it's MORE than what you calculated. That's because the published number is an average from real-world testing of the tire, when it's compressed under a vehicle's weight, which means it has to make more revs to go a mile.
Because it's rubber molded over flexible wire belts, which is specifically engineered to change shape. And if the shape isn't a circle, then the distance around it CAN'T be d*pi, can it?How can it be any less?











