• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

THOUGHTS ON HALF CAB

knack

Contributor
Sr. Member
Joined
Feb 2, 2007
Messages
877
Wrong terminology. 3 point, not harnesses. Here's the only pic I could find.
IMG_0586.JPG
 

Speedrdr

Contributor
Legend in my own mind
Joined
Nov 27, 2017
Messages
2,028
Loc.
Paris, MS
Great to see all these low-profile seats in this thread. I always loved half cabs as a kid too - wanted one badly until I sat in one years ago and realized I wouldn't fit (6'4").

Todd Z.
You could be like me and have both knees replaced and a vertebral burst fracture. That took me from 6’0” down to 5’10”. On second thought, I can’t really recommend that just to fit comfortably in a half cab. 😂😂

Randy
 
OP
OP
mustanggarage

mustanggarage

Contributor
Sr. Member
Joined
Aug 14, 2018
Messages
647
I never updated this thread, but I did decide to go with the Half cab and I really am happy with how it turned out. I have plenty of room inside, I do not feel cramped at all, and I really like the way it looks.

so here are some after pictures to bring the thread to a happy conclusion at least for me. I used a roll bar from Toms bronco parts that can go under a soft top or even a full top if I ever want to trade around. the top is from Bronco Design, I used the stock appearing bulkhead from wild horses. I fully sealed everything and then bed liner'ed it to match the rest of the bed. it has been rained on several times and no water has entered the cab so it seems well sealed. I used a dome light from speedway motors and just wired it to my head light switch I considered wiring it to the door switches I use to operate my amp power steps, or adding new door switches, but in the end decided If I needed the light on, I would just turn it on lol.
I also used toms rear sliding window which is nice to get a bit more air flow when I open the windows, but I also finally went and had my ac system charged and it is working quite well. The wiper motor already had the reverse mounting bracket for the soft top, but I did have to make a small spacer to move it out a bit to clear the inside of the fiberglass top. I also had to slightly modify the wiper motor cover and make similar small spacers for it. I think it makes for a nice finished look inside. overall everything works like I hoped it would and I love how it looks. I may have said that a few times already lol.
 

Attachments

  • IMG_4494(1).jpg
    IMG_4494(1).jpg
    74.9 KB · Views: 183
  • IMG_4495(1).jpg
    IMG_4495(1).jpg
    60.3 KB · Views: 164
  • IMG_4493(1).jpg
    IMG_4493(1).jpg
    49.8 KB · Views: 186
  • IMG_4501(1).jpg
    IMG_4501(1).jpg
    163.2 KB · Views: 158
  • IMG_4487(1).jpg
    IMG_4487(1).jpg
    123.8 KB · Views: 158
  • IMG_5040.PNG
    IMG_5040.PNG
    257.9 KB · Views: 169
  • IMG_4499(1).jpg
    IMG_4499(1).jpg
    169.3 KB · Views: 170
  • IMG_4786(1).jpg
    IMG_4786(1).jpg
    151.9 KB · Views: 155
Last edited:

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
Great to see all these low-profile seats in this thread. I always loved half cabs as a kid too - wanted one badly until I sat in one years ago and realized I wouldn't fit (6'4").

Todd Z.

You just need to lengthen the top, lower the floors and then (doing this on the present one) move the rear window back farther (and you'll be comfy as heck. :) Works for me and a buddy who is 6'4" and he can't believe the room in it (this in the one w/o the window moved yet)... The non-negotiable MUST HAVE that all Broncos should have but are usually hard to fit in a 1/2 cab are high back buckets to prevent long term neck and back injury. Do the above and you're good.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
Yeah, on mine the floors and top took some time but the difference is unbelieveable. We are in it for such long drives it was worth it. Also, the floors being lowered and flattened almost to the wheel wells was designed to allow fitment of longer mufflers which really helped allow us to be able to talk when cruising at 75mph with tube doors and just a wind screen in the back. Huge difference for us.
 

ssray

Contributor
Sr. Member
Joined
Apr 19, 2010
Messages
922
Loc.
South Central NE
Yeah, on mine the floors and top took some time but the difference is unbelieveable. We are in it for such long drives it was worth it.
I’ve had a lot of thoughts about going longer half cab. I’m 6’ 3” and that is a factor. The other day I got to wondering if there might be something out there in pik and pull land that would have a roof that could be cut out for the roof portion to save the work of splicing the top from two pieces. The rest would be mostly flat fabbed pieces. Don’t have a half cab either. Lots of different vehicles out there to try and envision what could work. Not sure what a pik & pull would charge for piece of roof either? A lot of years ago I had ideas about a fastback top, but dealing with glass for one has pretty much killed that idea.
 

fordguy

Contributor
Bronco Guru
Joined
Jan 23, 2005
Messages
6,362
I have always liked the way the half cabs look. My Bronco originally came with the full top. I decided when I built it to go with a soft top, but I put it on once and hated it. I have always liked the way the half cabs look. I originally got interested in broncos because of stacey davids crazy horse, but I liked the open feeling of the bronco. I have had a bikini top on it since I finished the major portion of the restoration and I really like the way it looks and I like how open it is. I don't care for it much when it rains, or when its really cold out. even 50 degrees is pretty chilly at 70 mph. so I have been considering putting a half cab on. my question is, are they pretty cramped inside? I am not a huge guy, but I am 5 10. so for all you guys with half cabs tell me the good and bad about them thanks

View attachment 933109 View attachment 933110 View attachment 933111
They are cramped.
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
Having been in a couple of half cabs with the window flush to the back of the cab, I would do that long before stretching the cab its self. In my bronco the seats are lowered, steering column moved closer to the seat and the seat mounted further back, a half cab with the window flush with the back is more than enough to make it all fit. I’ve had some really tall and large guys in my truck and they all think the seating position is perfect.

@mustanggarage I really enjoy your threads and love the passion that you have poured into not just your bronco, but all of your projects.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
Agreed 100% on the glass to the back w/o needing to stretch the cab. On Shorty, if I ever get back to it- that is the plan as it's much easier. Lowering floors is the key as it's night and day... course I've lowered the roof height for Shorty also so even for a guy that rarely wears at hat (except in the desert while wheeling) I have plenty of headroom in both rigs with lowered floors.
 

Speedrdr

Contributor
Legend in my own mind
Joined
Nov 27, 2017
Messages
2,028
Loc.
Paris, MS
@Yeller and @nvrstuk, can one or both of y’all ‘splain the glass at the back of the 1/2 cab? Is the rear metal reformed to be the same plane as where the back of the cab sits on the bed rail? Hope this makes sense.
 
Top