What have you done to your Bronco today?

[904Bronco]

Nothing to see here... just paint drying in the Sun that finally showed itself.

 

[Speedrdr]

Nothing to see here... just paint drying in the Sun that finally showed itself.

Color looks great in the sunlight and there’s no second guessing how it’s gonna look when all painted up and outside.

 

[fordguy]

Drove it for the first time in a long time. See my build thread and transmission woes thread. Put about 35 miles on it, highway and in town.

 

[sarens]

assembled the u-joints in my new front axles

 

[mdainsd]

Inching towards exterior paint going on.

 

[mdainsd]

The inside of the front fenders before installation.

 

[fordguy]

Building another sub box, other two were too small.

 

[Bruners4]

Spindle bearings, wheel bearings and seals replaced and greased. Hub Loks cleaned and refreshed. Brake rotors deglazed, caliper slides lubed and reassembled.
Transmission cooler to transmission hard line hose and clamps replaced. Unfortunately, it looks like the stock explorer cooler has developed a leak. Looking for a replacement now.

 

[JefeAZ]

Still in the tear down stages of this 71 frame off restoration. Pulled the 170, trans and transfer case and picked up the rebuilt 302

 

[fordguy]

New exhaust. Can’t upload video. Walker quietflow 3 , not quiet, not loud.

 

[399strokerEB]

Well after getting the wrong output shaft twice, I ordered the entire aod swap kit. Hopefully I can get this transmission finally put back together this weekend.

 

[Shimmy]

Building another sub box, other two were too small.

nice!! i've switched to a down firing setup so i have more space and can place items on top of the sub box

 

[fordguy]

nice!! i've switched to a down firing setup so i have more space and can place items on top of the sub box

This box is too big but brings the right amount of bass. Going to port the next box. Show us a pic of the down firing box.

 

[399strokerEB]

Parts finally showed up tonight, should hopefully have the trans back in tomorrow evening.

 

[399strokerEB]

Now to put it in the bronco

 

[399strokerEB]

And just like that I have a driving bronco again! Still need to top off the fluid, but it goes into drive and reverse

 

[tasker]

Congrats!!

 

[Soylent]

Back in the garage for painless rewire. Took another look to see when I want to remove the cage, steering column, dash…… might as well do the serpentine conversion while I’m at it. Maybe next week.

 

[Speedrdr]

Well, the AC system for Retirement Project came in but I’m not sure they sent what I ordered though.

 

[SouthPaw74]

Ever since I removed the hard top, my rear panels had to be removed due to the flap covering the bracket and bolts. I always felt the interior looked incomplete without them! Instead of buying new but non-matching panels from a vendor, I had a local shop modify my original Ranger rear panels to fit with a soft top. Very pleased with the result!