• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

What have you done to your Bronco today?

BronCowie

Contributor
Old Timer
Joined
Apr 24, 2007
Messages
8,290
Loc.
Vancouver, WA
Replaced a brake hose at the front left: it was old and it burst while I was driving last week. While doing that I discovered that the locking hub on that wheel was stripped (?!). So I ordered a new set of Warn hubs, should arrive by Saturday.
One thing leads to another... right? :cool: :p
 

Shimmy

Contributor
1977 Bronco
Joined
Jun 20, 2021
Messages
1,396
Loc.
Maple Valley
picked up an 80s F250 bellhousing for my hydraulic clutch conversion. not bad for $65
 

Attachments

  • IMG_3968.jpeg
    IMG_3968.jpeg
    215.1 KB · Views: 124

Jwredneck

Full Member
Joined
Feb 23, 2010
Messages
162
Loc.
Edgewood,Wa
What started as a heater box rebuild turned into a whole dash rebuild. Once I started removing the heater box I found the wiring was just a fire hazard waiting to happen.

All vampire connectors and excess wires removed. Stock harness repaired where the vampires had been used. All new heater controls, switches, lights etc.

A lot of people hate wiring, but it is so satisfying for me when it comes out nice.
1000024940.jpg
1000026611.jpg
1000026615.jpg
 

Oldtimer

Contributor
Jr. Member with Sr. moments
Joined
Feb 4, 2005
Messages
1,802
Loc.
Sunnyvale, CA
These rascals. They pierce the insulation, nick the conductor strands, and allow water to start corrosion. Might be good for trail repair, but long term are a problem waiting to happen.
1778004213062.jpeg
 

NJBronk

Contributor
Sr. Member
Joined
Oct 11, 2022
Messages
369
Finally over the hump and starting to put things back together!

Got the clutch, bell housing, and driver’s side ceramic coated header in today. Need to get a starter before I do the passenger side header and then can finally get the rebuilt transmission and transfer case in.

Hopefully she’ll be on the road by the time it gets consistently nice out in NJ.

IMG_5258_Original.jpeg


IMG_5689.jpeg


IMG_5691.jpeg


IMG_5692.jpeg



IMG_5696.jpeg
 

JefeAZ

Bronco Guru
Joined
Aug 23, 2011
Messages
3,088
Loc.
Tucson
That old Ford flatbed is very distracting to your subject... Is that a '48? :cool:
Good eye its a '48 F5. My Dad found it under a tarp outside of Portland OR in incredible shape. Had it towed here to dry out. Got the flathead running and took it for a cruise around the neighborhood. Even got the bed up and down. Amazing piece of machinery for its age.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
It sure adds up fast now!!!

I put over 100 gallons in the Bronco while at Moab and wandering around in the Valley of the Gods, Monument Valley, Moki and Butler Wash areas...

Another 18 more today...

Not that the rain gutter is nasty rusty but the original sealer was DTM and I learned my lesson there. I lengthened, built and put new longer sides on this 1/2 cab 20 yrs ago... how come stuff doesn't last forever??? :)
 

Attachments

  • 20260518_133703.jpg
    20260518_133703.jpg
    109.7 KB · Views: 81
  • 20260517_120137.jpg
    20260517_120137.jpg
    135 KB · Views: 92
Last edited:
Top