• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

What have you done to your Bronco today?

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,720
Loc.
San Martin, CA
Getting closer with the 66 Project, just a few more To - do's on the list and parts to come in from WH's and Summit.
 

Attachments

  • 20260723_173606.jpg
    20260723_173606.jpg
    257.9 KB · Views: 112

hunter1

Contributor
Sr. Member
Joined
Feb 2, 2013
Messages
522
Loc.
Maryville, Tn
On year 7 of a full build that started as a frame, taillight post's, and windshield frame. Most every other body part is new. Finally putting it all back together. These are from this morning before I put the driver door on. Next, roll bar, seats installed and windshield when I can get one of my son's over here to help.

IMG_1787 (1).jpeg


IMG_1788.jpeg

IMG_1789.jpeg
 

pbets756

Contributor
Jr. Member
Joined
Nov 21, 2012
Messages
121

gnsteam

Contributor
Bronco Guru
Joined
Jan 29, 2010
Messages
4,148
Loc.
Lincoln NE
Thursday, Bruners4 and I put a charge into the our wiring job. Luckily, no sparks, smoke or blown fuses. So we proceeded to test the systems. I have to say we were working with a weak 7 year old battery, that was only at 10 volts. Even while hooked up to a 10 amp battery charger. We didn't have enough current to run the wiper motor continuously. And the Vintage Air system was not happy with the low voltage. But we did have enough to test the lights all around. So far one brake light was not coming on and the reverse light were on all the time. The brake light turn out to be a connection in the Painless plug at the steering column. Some fiddling with the plug and re-crimping one of the terminals in the plug solved the brake light issue. The reverse light issue was traced back to two power leads connected to the lights. One from the transmission switch and a hot all the time lead. Removal of the hot lead solved that problem. Friday, I, picked up a new battery and the Vintage Air came to life. Yee-Haw.
 

Bruners4

Full Member
Joined
Jul 22, 2019
Messages
286
Loc.
1/2 way to everywhere
No pictures yet. Picked up the ‘68 after the repair of some rock chips and it’s Final Cut & Buff of the paint. It is looking great!
I attended the Wisconsin BSC and won the new sliding rear windows raffle prize! These are from the supplier and I ordered the black frames with the tinted glass. Front half slides back to have an open window and the back slides forward to a sliding screen covered window. They are installed and they look and work wonderfully!! Tested their air flow yesterday in our 100 temperatures and they make all the difference. Very nice flow through air when rolling down the road.

I want to send out a huge “Thank You” to the manufacturer and supplier of the sliding rear windows that are now being sold by our Bronco venders!
Sliding Rear Windows
 
Last edited:

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
Well, it's not exactly what I did today...

but the first 3 days last week I burned 45, yup 45. plus gallons of gas... the only time burning gas is this much fun is when you're in 3 plus feet deep of snow in the spring. Once it's all slushy for the bottom 2 feet, then the top 2 or 3 or 4 feet is all fresh stuff. And if you can't shift fast enough, you come to an almost a complete stop when shifting even if you're doing 25 miles an hour, cause it's like driving in wet cement...awesome stuff.
 

Attachments

  • Screenshot_20260725_175146_Facebook.jpg
    Screenshot_20260725_175146_Facebook.jpg
    79.6 KB · Views: 108
  • 20260723_203105.jpg
    20260723_203105.jpg
    95.6 KB · Views: 106
  • IMG_20260725_180655.jpg
    IMG_20260725_180655.jpg
    80.9 KB · Views: 95
  • Screenshot_20260727_170549_Gallery.jpg
    Screenshot_20260727_170549_Gallery.jpg
    33 KB · Views: 106
  • Screenshot_20260727_170549_Gallery.jpg
    Screenshot_20260727_170549_Gallery.jpg
    33 KB · Views: 86

gnsteam

Contributor
Bronco Guru
Joined
Jan 29, 2010
Messages
4,148
Loc.
Lincoln NE
Yesterday, Bruners4 and I, installed the upper intake, and filled all of the fluids. We then removed the spark plugs and cranked over the engine until we had oil pressure. I witnessed the pressure rise above 50 psi when we stopped cranking. Having one more successful test behind us. We re-installed the plugs and continued to ready the Bronco for first start up next week.
a358d226-8482-4389-be4f-a067ab33113d-1_all_6139.jpg
a358d226-8482-4389-be4f-a067ab33113d-1_all_6138.jpg
a358d226-8482-4389-be4f-a067ab33113d-1_all_6137.jpg
 

mdainsd

Contributor
Full Member
Joined
Mar 16, 2025
Messages
263
Loc.
San Diego
Tailgate and spare mount nearly done. Unfortunately I found out too late the the tire rack is corroded inside and comprimised so will be doing that all over again. Got to got to work outside so came in and took the first steep on reassembling the dash.

IMG_3422.jpeg


IMG_3423.jpeg
 
Top