• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

fender flares for UNCUT fender

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
To what end? And are you talking front fender, or rear? Or both?
Do you mean something like a simple fender extension?
Nobody that I'm aware of makes a molded version (that I've ever seen), and most of the universal fit ones don't contour very well to Bronco openings.
The ones I've seen looked pretty dodgy.

Are you just wanting more debris control, more paint protection, or just trying to avoid cutting?

Paul
 
OP
OP
B

bowhunter1331

Contributor
New Member
Joined
Nov 5, 2026
Messages
36
To what end? And are you talking front fender, or rear? Or both?
Do you mean something like a simple fender extension?
Nobody that I'm aware of makes a molded version (that I've ever seen), and most of the universal fit ones don't contour very well to Bronco openings.
The ones I've seen looked pretty dodgy.

Are you just wanting more debris control, more paint protection, or just trying to avoid cutting?

Paul
Thanks Paul, I want them for front and back, debris and looks, running 33x 10.5 and they stick out alot. I do not want to cut the rear fenders
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
I can't say they don't exist, but I've never seen any that do what you're asking.
For the fronts, the universal ones were only ugly. But they worked.
For the rear however, they were not only ugly, but they fit for crap. Can't say they didn't work, but it was sure hard to get to that point.

Pretty sure nobody ever made much of an effort however, because by the time you wanted larger tires, the rear fenders needed opening up by cutting. Making the products like Bushwacker flares very sellable. Which is what it takes to justify making a product for sale.
There are members here that have put on much larger diameter tires without cutting, but they're few and far between. Frankly, I think those Broncos look fantastic for the most part.
But Broncos with stock fenders and much "wider" tires, that's not a look that most are hunting for. But for those that do, I'm sure they all would like some protection like you're asking about.
Just wondering what the actual demand would be.

Back in the day, when these were just ordinary (and relatively inexpensive) utility/work trucks, most did not mind cutting some sheet metal to get the performance and/or look they were liking.
Now of course, more and more are unwilling to cut sheet metal (especially original!) to get that look. So I hear what you're asking, just not sure it's available.
Maybe a little poll here would help to define the need. I'm betting that most of us would still rather have an uncut fender, OR a wider tire. But not both.

In cases like yours specifically, where a 10.50" wide tire was fitted, the usual cure is a narrow wheel with enough backspacing (just the right offset) to keep it tucked under the uncut metal. Without the need for a flare.
What size and offset wheels are you running? Very curious to see what you're dealing with.
Oh, and along those thought lines, the universal flare materials were usually in just two flavors. Either 2" wide (roughly) or 4" wide (or was it 6?). Which meant it was either too narrow to cover the tire, or too wide to look even remotely presentable on a stock-ish Bronco.

Are you running at stock height also? How far out do they stick?
Had another question too, but can't remember what it was! I hate it when that happens!

Sorry if you already knew the history of Broncos and flares and the progressions. But thought I'd throw it all in there in case you're newer to the Bronco world and not just the forum.

Good luck. But if your needs are not for a super-wide model flare, I would put it out to the community at large and see if anyone has found anything.
I still think that the rear is going to be a hard fit, with that profile. Especially on the sharp downturn of the leading edge.

Paul
 

gnsteam

Contributor
Bronco Guru
Joined
Jan 29, 2010
Messages
4,148
Loc.
Lincoln NE
has anyone found a fender flare that will work on a uncut fender?
A friend and member on this site, Bruners4. Added these ABS mud flaps to his rig. The Bronco has the aftermarket rear cut fenders. But something like this may work for your application.
a358d226-8482-4389-be4f-a067ab33113d-1_all_6218.jpg
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
That’s a slick looking flare/flap. Did he have to trim it from another vehicle, or do they come in that basic shape?
By not being a full fender flare, you don’t have to deal with the finicky parts of a Bronco rear wheel well opening. Might still work for the OP’s needs.
If you can get away with essentially just a mudflap rather than a full flare?
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
It would be pretty impressive to get 33 10.50s in the back of an uncut without rubbing issues. Those won't be sticking out needing flares. Matching wheels up front would be tucked in pretty good as well. And probably interference without excessive amounts of lift.
 
OP
OP
B

bowhunter1331

Contributor
New Member
Joined
Nov 5, 2026
Messages
36
You can see they just stick out a little bit .
Not sure the offset, I haven’t pulled off rims to see
 

Attachments

  • IMG_2352.jpeg
    IMG_2352.jpeg
    141.9 KB · Views: 52
  • IMG_2350.jpeg
    IMG_2350.jpeg
    175.3 KB · Views: 53
OP
OP
B

bowhunter1331

Contributor
New Member
Joined
Nov 5, 2026
Messages
36
How does the tire not crunch the quarter panel? Looks like maybe 2" before they touch.
not sure, i believe there is a lift on it and never had any weight in it. ive literally only drove on the trailer and about a 6 mile round trip to the car wash to clean off motor
 

Bruners4

Full Member
Joined
Jul 22, 2019
Messages
286
Loc.
1/2 way to everywhere
OP
OP
B

bowhunter1331

Contributor
New Member
Joined
Nov 5, 2026
Messages
36
Short version: I had seen these 'Mud Flaps' on some pickups in the past. Looking for them, I found Husky and Warn had made them but no longer offered them. I found mine at Northern Tool and ordered them. Checking today I see that they are still available.
[/URL][/URL]
thanks, I did find them , i think
https://www.northerntool.com/produc...ir-12in-w-x-37in-h-black-model-b1237ppb-61858

i couldn't get your address to work

also just found these.
https://zips.com/parts-detail/phone...MI3u2DkIGSmAMVCTgIBR1nxSdoEAQYBiABEgJrqPD_BwE
 

dmoses42

Contributor
Bronco addict
Joined
Jan 25, 2017
Messages
656
Loc.
Chatsworth, Ga
I know it is all personal preference, but those wheels look too wide for the tires. I would look for wheels that would tuck in better, even if you only change to offset/backspace on the rear ones.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
At some point though, it goes beyond personal preference and gets into the realm of safety.
If those are indeed 9 1/2 to 10 inch wide wheels, they’re actually too wide for the tires.
And if that’s the case, I’d be very surprised that a chain tire store would install them.
It’s not typically a problem immediately, but if you ever run a tire low on air pressure, and run through some water, that wet tire bead can easily slip right off the wheel.

I literally watched it happen to a friend’s suburban one day. I was following them to let them know that their tire was low, and when they pulled into the school parking lot to drop the kids off, they went through a little rivulet of water in the gutter, and going around the turn into the driveway, the rear tire literally peeled right off the wheel right before my eyes.

And no, in my opinion at least, those are not “just slightly” sticking out of the fenders. They are a problem waiting to happen on multiple levels.
The bottom line is that the wheels are both too wide AND have an improper offset for an early Bronco.

Yes, you can continue to search for a mudflap/wheel well lip extension to keep debris from being thrown up onto the paint and other vehicles behind you. But you’d be better served by changing the wheels instead.
Easy for me to say, spending your money for you! 🙄😉
But that’s my recommendation.
 

Bruners4

Full Member
Joined
Jul 22, 2019
Messages
286
Loc.
1/2 way to everywhere
Microsoft Edge doesn't like Northern Tool's web site and will not display anything. I had to use Google Chrome for their site to work.
Your find is very interesting and has potential.
I agree with the others on the tire/wheel combination. Someone knows the magic wheel configuration that would be a better fit for your setup.
 

syndicate1

Contributor
Sr. Member
Joined
Feb 14, 2015
Messages
463
I would recommend buying a couple of different brands from one of the Bronco vendors and do a test fit. There is a good chance that you will get what you're looking for.

Here is a pic of my rig with the original dealer installed fiberglass flares. The front fenders are uncut.

d618ba6c7e67328724fbbe19002ec34b.jpg
 
Top