• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Ram assist questions

moeszyslak

New Member
Joined
Sep 11, 2009
Messages
39
I am wanting to see if I can get some pics of a ram assist installed on an early bronco. I purchased the psc kit through wcb4x4.Com.
I am having trouble figuring the best place for the ram to be located. I have a 1.75*8 ram. Thanks in advance.
 

bigjhoov

nobody
Joined
Apr 10, 2005
Messages
3,583
They're typically mounted with the body of the ram attached to the trac bar mount on the axle via tabs. Piston end gets mounted to the tie rod with another set of tabs.

Found a pic in another thread. Search "hydo assist" for more help.


attachment.php
 

FFMDX

Sr. Member
Joined
Mar 12, 2004
Messages
542
Loc.
Roseville, CA
This is how my Redneck Ram is mounted (custom mount made out of 1/4" plate). On the axel side, it is mounted where my panhard is mounted and then onto the tie rod. Some people like to mount the body side of the ram on the frame, pushing on the drag link..I'm not a big fan of that set up, mainly because of the potential lateral pressures placed on the frame and drag link/steering box especially when your tire is btwn two rocks and you keep turning the wheel. You cant really "feel" the road/trail as much with the ram; and the pressures created by the ram are pretty high.

Just My $.02

Sean

http://www.norcalbroncos.com/forum/attachment.php?attachmentid=2060&d=1153020504

http://www.norcalbroncos.com/forum/attachment.php?attachmentid=2059&d=1153020504
 
OP
OP
M

moeszyslak

New Member
Joined
Sep 11, 2009
Messages
39
I am thinking about going from welded cross member directly to pitman arm or drag link. Just looking at these options it looks like I will have some clearance issue
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
I am thinking about going from welded cross member directly to pitman arm or drag link. Just looking at these options it looks like I will have some clearance issue

That puts all the stress that the ram + steering box can generate all into the drag link (and depending on steering linkage all through the passenger knuckle).

By mounting to the axle housing and going to the tie rod you are distributing the power steering forces more evenly. Even if all the force is going into a single knuckle it is coming from 2 separate sources. Say everything is going into the driver's knuckle, yes that one rod end takes all the force, but it isn't all going through the passenger knuckle and the drag link as well.
 

C Saporito

Full Member
Joined
Oct 18, 2007
Messages
259
I had a problem fitting the ram with my drag link and steering arm, I used a method similar to what you are talking about.

I have HD hemi connectors, I would not set it up this way with the stock tierod ends and drag link.

One pic shows now, the other is before TRO and dropped track bar mods, but shows the drag link connection.
 

Attachments

  • IMG_3985.jpg
    IMG_3985.jpg
    98.5 KB · Views: 171
  • IMG_2864.jpg
    IMG_2864.jpg
    121.5 KB · Views: 149
OP
OP
M

moeszyslak

New Member
Joined
Sep 11, 2009
Messages
39
They're typically mounted with the body of the ram attached to the trac bar mount on the axle via tabs. Piston end gets mounted to the tie rod with another set of tabs.

Found a pic in another thread. Search "hydo assist" for more help.


attachment.php

Does anybody have some close up pics of mounting to trac bar mount. Like I said before I'm concerned about my ram fitting and not hitting anything
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
It's a legit question moe, but the proof of the final setup is going to be subject to exactly what you have in your kit and how your truck is set up. Not to mention that thing that keeps rearing it's ugly head, that every Bronco is different.

So while the pics might help, the only thing that's going to get you where you need to go with your particular Bronco is to start mocking it up and cycling the steering through it's travel.

As you figured, it's a tight little world down there under the front of an EB. Not a lot of room to add other cool stuff.
But it can be done in most cases luckily, so hopefully yours too.

Got pics of your current setup? Is it all stock linkage? Lifted how much?
Thanks

Paul
 
OP
OP
M

moeszyslak

New Member
Joined
Sep 11, 2009
Messages
39
No pics right now. It's in pieces.
Lift. 5.5 James duff
Trac bar. Drop bracket on frame
Knuckles. 78 f150 disk brakes
Steering. 1.5 solid chrome moly tie rod. Drag link 1.25 solid bar both with 3/4 hiem joints.
78 f150 steering box
 

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
This is the same Bronco that Bigjhoov posted. Notice that the tierod is under the knuckle, I could not do TRO and have enough clearance to make it work. The tract bar mount is up 3 inches on the axle using WH riser. I have 2 of them setup exactly like this. The other one is not finished yet but doesn't have any clearance issues. I have seen numerous others setup the same way.
 

Attachments

  • IMG_1681.jpg
    IMG_1681.jpg
    132.6 KB · Views: 134
  • IMG_1521.jpg
    IMG_1521.jpg
    111.2 KB · Views: 149

gddyap

Bronco Guru
Joined
Mar 8, 2005
Messages
1,334
Loc.
Mtn View, CA
I'm going to have to redo mine. I had the body mounted by the axle track bar mount and the shaft mounted to a clamp on the tierod. The ram wasn't parallel to the tierod so as it pushed and pulled it caused the tied rod to roll forward and back. I would need to extend the mounts on the axle.
Also I've read you want both joints on the ram to be mounted in the same plane, ie both bolts vertical or horizontal. If you look at bigjhoov's, the mounting bolt on the axle end is vertical and the bolt on the tierod end is horizontal.
I use the Performance Unlimited steering with heim joints and it looks like bigjhoov's. I'm considering attaching the shaft end of the ram to the driver's knuckle. This may balance things out because the drag link is attached to the passenger knuckle. The body of the ram would be mounted to tabs on a RuffStuff 3/8 diff cover.
 

chuzie

Bronco Guru
Joined
Jul 21, 2006
Messages
2,761
5.5 James Duff, WH drop and adjustable.
 

Attachments

  • uploadfromtaptalk1456780993376.jpg
    uploadfromtaptalk1456780993376.jpg
    80.8 KB · Views: 163
  • uploadfromtaptalk1456781041089.jpg
    uploadfromtaptalk1456781041089.jpg
    64.9 KB · Views: 141

Apogee

Contributor
Bronco Guru
Joined
Nov 26, 2005
Messages
6,348
Loc.
Tangent, OR
...Also I've read you want both joints on the ram to be mounted in the same plane, ie both bolts vertical or horizontal. If you look at bigjhoov's, the mounting bolt on the axle end is vertical and the bolt on the tierod end is horizontal...

I've read that too...it was in PSC's installation instructions IIRC. I disagree with that statement though, as it shouldn't matter so long as you don't exceed the range of motion of the spherical rod ends with which you've mounted the cylinder. My brother and I mocked it up both ways on his Toyota and chose to use the out of phase orientation for packaging reasons.
 

gddyap

Bronco Guru
Joined
Mar 8, 2005
Messages
1,334
Loc.
Mtn View, CA
I use a Redneck Ram on my 76-77 Dana 44. I measured for the ram travel and had them put in a limiter. It's about 7". So you should measure what your ram travel will be lock-to-lock before you install your 8" ram. You may want to limit its travel.
 

chuzie

Bronco Guru
Joined
Jul 21, 2006
Messages
2,761
Same here. I had to limit my PSC about an inch. Had an aluminum spacer made for it.
 

chuzie

Bronco Guru
Joined
Jul 21, 2006
Messages
2,761
Well crap! Wish I had known that. Noted for future reference. Thx
 
OP
OP
M

moeszyslak

New Member
Joined
Sep 11, 2009
Messages
39
Same here. I had to limit my PSC about an inch. Had an aluminum spacer made for it.

I measured mine stop to stop on the axle. I have 7 7/8 travel . No drag link hooked up. Need to get reassembled. 8" ram so hopefully ill be good.
 

treihesse

Bronco Guru
Joined
Aug 1, 2008
Messages
1,459
If ypu you do not stroke the ram it will blow out your ball joints. Find your steering stroke ( around7") and have a spacer made to limit it. Stick it up on stands and cycle your suspension left and right for clearance.
 

treihesse

Bronco Guru
Joined
Aug 1, 2008
Messages
1,459
I put a framing square on the axle to the tie rod made marks on both. Cycle left and right made marks on both then measure it. Limit thay measurement by 1/8
 
Top