A whole lot more plumbing than the simple... one wire to the alternator, one to the choke and one to the coil and a single metal gas line up to the carb!! You'll like it!
Community
Buy / Sell
Bronco Tech
Fuel Tank Access Plate
3 Arm Wiper Setup
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
3 Arm Wiper Setup
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
-
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!If you have problems registering or can't log into your account, please contact Admin.
What have you done to your Bronco today?
- Thread starter Heus33
- Start date
Yeah I hear you. Not my first go around with EFI. I love me some EFI!
I've done about three so far with this one making my fourth, so not intimidated. However, it has been like 8 years since I really gave it any real thought or hands on, so it takes more brain power than it used.
Still need to finish up the Painless, quick4 and Ryans EFI harness wiring and that will get my brain burning...
I've done about three so far with this one making my fourth, so not intimidated. However, it has been like 8 years since I really gave it any real thought or hands on, so it takes more brain power than it used.
Still need to finish up the Painless, quick4 and Ryans EFI harness wiring and that will get my brain burning...
You had to have taken pics of this???Found out my little Bronco can tow my F250 CC while that is towing a car trailer...When life gives you lemons, find a way to use your Bronco!
Something like this?Found out my little Bronco can tow my F250 CC while that is towing a car trailer...
Attachments
- Joined
- Jun 5, 2007
- Messages
- 1,762
I can’t wait to drive my clapped out bronco from Minnesota to one of these events!!! Been waiting 22yrs
ntsqd
heratic car camper
Found out that my avatar could PUSH the '67 Ranchero uphill with the tow bar when the C4 puked all of it's ATF.Found out my little Bronco can tow my F250 CC while that is towing a car trailer...
- Joined
- Apr 19, 2013
- Messages
- 433
Still making progress, but it is slow going. I decided to build a golf simulator in my garage, so that is taking a lot of time, and priority over the bronco....for now. I also need a little break after installing the front and rear seats. Everything required a big adjustment or a new bracket. Thankfully I found this thread with 904Bronco's console bracket, Console Link
and I was able to make my own. I also moved the rear seat up and made new brackets for the rear latch that incorporates the seat belts. I am going to have the console cover and dash pad redone with the same material as the seats.
and I was able to make my own. I also moved the rear seat up and made new brackets for the rear latch that incorporates the seat belts. I am going to have the console cover and dash pad redone with the same material as the seats.
Jwredneck
Full Member
Finished putting the top back on.
"She's a beaut', Clark!"
Lucky. Just keep rubbing it In. One day I’ll get there.
Swapped out the rear large cap 1330 yoke with a shorter small cap 1330 yoke. At some point I need to weld a new cap to the bottom side of the slip yoke, the original one got knocked out in shipping.
I also tore down the aod and 4r70w last night, the aod looked great. The 4r70 definitely has some broken parts.
- Joined
- Nov 19, 2024
- Messages
- 395
Seam sealing, detailing, designed new front winch bumper
Finally got all the guts from the 4r70w matched with the aod components. Now I just need to order a rebuild kit and put it together.
Similar threads
