Search results

I was asked how to rig up automatic headlights on an EB. I found a cheap aftermarket module specifically designed for this purpose. It is a Directed Electronics 545T Nite Lite, available for about $30 on Amazon. Wiring instructions are here...

I drove to Sacramento CA and back over the holidays and only spotted this one.

Looking for a cheap V8 spud shaft. Really want an auto shaft but I can make a manual V8 spud work.

wiper toggle

Looking for a Bronco C4 output shaft. Don't need the complete C4 unless it's cheap.

http://cgi.ebay.com/ebaymotors/Steel-Winch-Cable-5-16-x-125ft-New-_W0QQcmdZViewItemQQhashZitem4aa32e7db9QQitemZ320565312953QQptZOtherQ5fVehicleQ5fParts I bought one of these and just wanted to pass the deal to anyone else that was looking.

Not mine, just ran across a decent deal on some 10" slots. Might need the center hole enlarged to fit hubs though. http://boulder.craigslist.org/pts/1826498186.html

A matched set of 15x8.5 Shelby Cal 500's. Not bad for $120. They need some cleaning.

This is a package deal. EB power steering box, double groove pulleys, PS brackets, pump and cooler. Box and pump both work great and do not leak. Box came off my Bronco last month when I put a quick ratio box on. Everything else came off when I put the EFI in. Sorry no hoses. PM if interested.

Is there any way to do a search by attachment file names?

Guess this part, and win.

What is the difference in the clamping force when a 5/16"-24 fastener is used in place of a 5/16"-18? Should the -24 be torqued a lesser amount to provide the same clamping force?

Any guesses as to which ports were leaking and sucking in oil? It only seemed to leak during cold starts. Once it was warm I couldn't tell there was a problem. Took a while to figure out what was going on. I pinched off the PCV hose and still had suction at the valve cover side of the breather...

Got my hands on a spare aux tank from a '73 and figured I'd fix it up to replace mine which leaks a little. First thing I did was measure the capacity. It holds almost 12 gallons when standing on end. I know the rated capacity of a '73 tank is 7.5 gallons but the early years (before venting)...

drive their Bronco on the old Pony Express Trail across Nevada? I'm going to be driving mine to CA and was thinking about making an expedition out of it. I've driven most of the trail in UT when I lived there so I have an idea of what to expect there. I imagine the CA portion doesn't even...

Does anyone own a keystone Bronco? What I mean by "keystone" is the first one after a major change like the availability of the V8, Dana 44, C4, power steering, J shifter, disk brakes, etc. These are sequence numbers for a few keystones. Please add more if you know them. K20001-Dana 44...

I got tired to the overly sensitive off-idle throttle response of my 65mm explorer TB. I made some measurements of my pedal travel, drew up some ideas, and made a trip to the hardware store. I found a cheap pulley with a steel wheel about 1 1/2" in diameter. I cut about 40% of the wheel off so...

Anyone got one? I don't think I've ever seen one.

Does this arm use the same taper at the draglink hole as the '76 and up knuckles at the tierod holes? If I wanted to use a late style pitman arm with a early style draglink could I use a bushing like this to correct the taper...

Does anyone make new ones in rubber? I can't find them.