• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. JWMcCrary

    Electric pusher fan wiring, key on & off

    Currently in a wiring makeover and I'm wanting to have my pusher fan kick on when the temp reaches the setting but also when I stop I would like to be able to run the fan without having the key on (which is what I've been doing for years). I know this can be done with properly placed diodes...
  2. JWMcCrary

    My 2021 updates on my 73 - long overdue - FINISHED

    Honestly, I'm not a good enough painter that my opinion should matter that much. However, I was able to spray it without any runs, not even one (so far). I grew up helping in my Dad's shop so I've been around it quite a bit but haven't had a paint gun in my hand in 30 years prior to this. I...
  3. JWMcCrary

    My 2021 updates on my 73 - long overdue - FINISHED

    Rock skis are done and welded on. I'm very limited on space, as I'm sure a lot of you deal with the same issue, so doing things a little different since I'm not looking for show quality, just improving. I prepped and painted the rear quarters and windshield frame, I had already painted the...
  4. JWMcCrary

    My 2021 updates on my 73 - long overdue - FINISHED

    Thanks to myself. I built the old motor in 2005, .040 over stroker, 395. Never had anything other than royal purple after breakin
  5. JWMcCrary

    My 2021 updates on my 73 - long overdue - FINISHED

    Working on the rock skis. The passenger side is in place and ready to weld on. The rocker and floor had been pushed in and up by the rocker guards I was running so I had to get that pushed back into place. I can't see good enough to weld those so using my smarts and having a friend weld them on...
  6. JWMcCrary

    My 2021 updates on my 73 - long overdue - FINISHED

    Put a patch over the hole for the heater vent, deleting the heater as part of this work. I cutout the speaker grill from the old dash and using it on the passenger inner fender under my trans cooler, should allow it pull a little fresh air as opposed to pulling just air from the engine bay. When...
  7. JWMcCrary

    My 2021 updates on my 73 - long overdue - FINISHED

    Got the Bilt Cool panels installed on the inner fenders. That was a chore. The passenger side inner fender was part of an old battery box repair from before my time, but it's still solid and holding up, SO, I had to modify the panel to fit. The drivers side had been crumpled in the past before...
  8. JWMcCrary

    My 2021 updates on my 73 - long overdue - FINISHED

    Goodbye gas fillers. Still need a little more work but that will get covered when I do the prep work for painting. My painting skills need all the prep and help they can get.
  9. JWMcCrary

    My 2021 updates on my 73 - long overdue - FINISHED

    Local retired Marine Veteran who still does glass work on the side helped me get the windshield out. I wanted to take all precautions to not break so I wouldn't loose my Deep Faith sticker. I bought a new gasket so we cut it out. All good and he will come back when it's time to go back in.
  10. JWMcCrary

    My 2021 updates on my 73 - long overdue - FINISHED

    Having some good weather so I got the Bronco back into the garage to get started and have managed to get it torn down to the point needed for the work I want to do. If this was real restoration and not a trail/fun rig it would need a lot of sheet metal, but for my purposes I am repairing...
  11. JWMcCrary

    Moab hydroboost

    Good luck but I'm afraid you will not be happy. After doing the explorer swap on both of my broncos I ended up spending the money on Saginaw brackets and stuff to switch the pumps. But I have ram assist on mine.
  12. JWMcCrary

    My 2021 updates on my 73 - long overdue - FINISHED

    The original motor has Keith Black flat tops, will only work one way, and that's how they are.
  13. JWMcCrary

    My 2021 updates on my 73 - long overdue - FINISHED

    That's the most use I have gotten out of that storage table in quite a while ;D
  14. JWMcCrary

    My 2021 updates on my 73 - long overdue - FINISHED

    Not intended to be a color change but it's not an exact match. Still green
  15. JWMcCrary

    Explorer Serpentine Radiator Hose

    I have the one on my 302 like this. Problem, if you want to call it a problem, just not as easy, is can't use the long handle for putting the belt on and off, have to use short handle to clear the hose for enough swing which makes it a little more difficult.
  16. JWMcCrary

    My 2021 updates on my 73 - long overdue - FINISHED

    Got the tailgate off and stripped down, it's never opened and closed easy, rebuilding with all new parts except the gate itself. Did some repair and painted. Managed to get some grit in it so will need to wet sanding. But it's for the woods so will work on it some but not gong to worry with it...
  17. JWMcCrary

    My 2021 updates on my 73 - long overdue - FINISHED

    Dash and cubby are painted and considered done. Except for wiring and install of course. A lot to do before that happens.
  18. JWMcCrary

    Super Celebration East Roll Call

    I should be able to help you in about 75ish more posts. I'm counting on being psychic as well as super human smarter when I hit 5000.
  19. JWMcCrary

    TN Super Celebration EAST Parts Sale/Buy/Swap

    For sale: 351w crankshaft from a roller block, stock stroke. Engine was hydrolocked and bent a rod. I used the block to build a stroker. Crankshaft looks good and never been worked on, should polish but at worst minor turn. $50
  20. JWMcCrary

    TN Super Celebration EAST Parts Sale/Buy/Swap

    I have this that I'm willing to bring if anybody interested, only bringing if it's sold because it determines the vehicle I'll be driving. https://classicbroncos.com/forums/showthread.php?t=305938
Top