• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. JWMcCrary

    Exp Serpentine Alternator Bracket Options

    That's what I am doing to mine. I have some aluminum colored paint that a lot of hot rodders recommend for intake manifolds, was going to use that. Duplicolor engine enamel with ceramic.
  2. JWMcCrary

    Dana 20 clear inspection cover

    I had one, sure liked it, however it landed on something and cracked at one of the bolt holes and started leaking. I tried to reinstall with sealer but didn’t work, had to toss it.
  3. JWMcCrary

    A Q about the J

    They are magnetic enough, I have yet to have that little gizmo fail pulling one out and have used it many times. Even on the bench when easy to get to.
  4. JWMcCrary

    A Q about the J

    I took one of those little screwdrivers with the plastic handle and little magnet on the end. Cut the handle off part way down and ground it down around the outside to where it would slide into the hole. The plastic keeps the magnet from grabbing the side and the magnet will pick up the ball. I...
  5. JWMcCrary

    Which intake manifold gasket to use?

    The machine shop that I am using and have come to trust swear by cometic head and intake gaskets. The intake gaskets don’t even come with the end pieces so you can’t screw up and use them. I was shown comparisons and sure like what I saw. Haven’t used them yet but going to on the engine I’m...
  6. JWMcCrary

    Chevy front disc conversion

    Been a while and I no longer have it but I used 76 rotors and hubs
  7. JWMcCrary

    Super Celebration (East) registration is open!

    I’m planning to be there this year but not bringing either of my Broncos. I will register one of them beforehand though.
  8. JWMcCrary

    Bent header removal suggestions

    That's the best there is in my opinion. I just pulled these off my 351w, been on there since 2013. Installed tight and never had to touch the header bolts afterwards. Aluminum heads so the header bolts had anti seize but never had a loose bolt or a leak. Will be going back with the same.
  9. JWMcCrary

    Rear locker suggestion

    Yep, I've had 4.30s for 14 years and to me they are perfect for a 35" tire. I run them with 37s and no issues but 35s seem dead on to me with that ratio. No overdrive. Very rare does somebody else agree with that, 4.30 seems to get lost, most jump from 4.11 to 4.56 as if it doesn't exist. As...
  10. JWMcCrary

    Installing 74-77 IDIDIT column in 73 with painless harness

    Reworking my dash and installing IDIDIT direct fit tilt column intended for 74-77 model. I have a painless harness (Part #10108 using manual #90521 for installation) but it is an older one, 2006ish, still in great shape. My bronco is a 73 with the hazard switch on the dash which will be...
  11. JWMcCrary

    My 2021 updates on my 73 - long overdue - FINISHED

    Got a call from the machine shop, seems my heads are toast, mainly intake valves and guides. Edelbrock RPM Performer heads but all the valve guides and all the intake valves will have to be replaced. They said it shows signs of bad valve train geometry but it didn't make sense that it was only...
  12. JWMcCrary

    Only a Bronco guy would understand

    Man it looks great. My favorite wheels on a Bronco for looks. To be riding on July 4 and do all that work and then riding again in January is pretty good. Nice job.
  13. JWMcCrary

    buckaroo hood question

    Decided I didn’t need it. Hell I spend most of my life riding around with it empty in the vehicles that have it
  14. JWMcCrary

    buckaroo hood question

    I do have a buckaroo hood, bought it in 2007, but decided to ditch the windshield washer.
  15. JWMcCrary

    buckaroo hood question

    I'm running the same setup, however I don't always have the windex.
  16. JWMcCrary

    PSA- Taking pics with Iphone...

    I have found that after I downlead to my computer if i rotate the photo and then save it will post correctly, no matter the orientation I'm looking at. Even if its correct on my computer I move it then move it back, save it, then it posts correctly. I would assume this relates back to the tag...
  17. JWMcCrary

    Body color grille with chrome grille trim

    That's the look I was wondering about. Mine is forest green, right now doesn't have the trim but it came with it from the factory. I may just leave it off, the holes are already plugged so it would take some work to put back on, just considering since going to be painting in the spring. If I do...
  18. JWMcCrary

    Body color grille with chrome grille trim

    My 73 came from the factory with the Ranger package, however the side trim and grille trim was long gone and the holes filled when I bought it. It still has all the other pieces of chrome trim but it hasn't had the doors on for years and it has 1/4 guards. So all that's on it now is around the...
  19. JWMcCrary

    Pulley alignment

    I have this same balancer, bought it in 2005 and ran it on a 50oz balanced stroker until 2019. I just recently (early 2020) swapped the weight to 28oz and bought the serp pulley from WH for the explorer conversion on my 75 with a 302. I did not use the spacers behind the pulley on either bronco...
  20. JWMcCrary

    OH Holley 565-101 351W dual sync distributor

    3 years old, works perfect, still like new. Has gear for flat tappet camshaft. I'm switching to a roller motor and since I needed to change the gear decided to upgrade to the latest version of this distributor. I checked eBay and the cheapest one I saw there was $300 plus shipping. I'll ship...
Top