• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. JWMcCrary

    Opinions on New dash layout

    No experience with it, thanks for the heads up. Not sure how it could be worse than the cheapo rocker switches though. Hoping I have better luck
  2. JWMcCrary

    Serpentine kit

    X whatever, input the explorer setup on my 73 and then almost immediately switched my other bronco. It’s a good upgrade that there isn’t another substitute for.
  3. JWMcCrary

    Opinions on New dash layout

    Budget = hard work and good work ethic
  4. JWMcCrary

    Serpentine kit

    Bite the bullet and get the explorer front cover and water pump. Be a smart move while doing your engine swap, and have 1 belt instead of 2. My guess is the parts you are looking for would be as much as getting what you need from sandman, cost wise
  5. JWMcCrary

    Opinions on New dash layout

    I think this is what I have decided on. Haven't cut anything yet, waiting on the black billet steering column cover from WH that was backordered, it just shipped Friday so I may be able to get to work on this in a few days. The mounting for the arm that my Holley EFI monitor goes on was moved to...
  6. JWMcCrary

    Rebuilding Hybrid Dana 20 using T & J parts

    Interested in how thick? I have the billet aluminum cover on m7 73 and have considered it for the other one. Wasn't sure how much strength it added and if any ??? Sounds like you are saying ts worth the dollars...or maybe make a thick one out steel late?
  7. JWMcCrary

    351w Stroker - 28oz vs 50oz

    Got to love the smiles.....;D
  8. JWMcCrary

    351w Stroker - 28oz vs 50oz

    Thanks for all the replies. Got the answer I was hoping for. This engine has always run very well and still does, it just smokes a little so I'm taking this opportunity to redo it while some other major work is being done to the Bronco. It was built by me using a machine shop near where I was...
  9. JWMcCrary

    351w Stroker - 28oz vs 50oz

    In the process of reworking my stroker (395) and switching from a non roller to a roller block. Plan is/was to use the rotating assembly I have with new bearings and rings. The roller block is at the machine shop but I haven't taken them the rotating assembly as the current engine is still...
  10. JWMcCrary

    OH NP435 setup - includes adapter

    I will be driving from Akron Ohio to Jackson, MS end of this month unless something changes. Takes me thru Columbus, Cincinnati, Louisville KY, Nashville, Memphis. Can haul to meet somebody on that route if interested. BUT, I'm not taking less than the listed price, not intended to sound harsh...
  11. JWMcCrary

    Primer for single stage paint

    Planning to use paint from Summit and was going to ask them, thought i would get some opinions from here as well. I think you are probably correct on sealer vs primer. Was hoping I could get some spray cans for the time being to take care of my needs, will be a few months on paint.
  12. JWMcCrary

    Primer for single stage paint

    Is there a primer that comes in a spray can that can be used under single stage paint? Going to be a while before paint and need something that can be sanded and prepped without having to get it all off later, if possible. If it sounds like I don’t ‘now what I’m doing...congrats, dead on.
  13. JWMcCrary

    Opinions on New dash layout

    Thanks for the info, non issue for defrost duct as the heater is being deleted. I have a small panel with fuses and relays I’m adding behind the dash on the firewall that has grounding points. My goal is to contain the bulk of the wiring under/behind the dash to clean up the mess I have under...
  14. JWMcCrary

    Torque main caps before machine shop work

    X1000, If I have to torque them myself to make sure the machine shop does it correctly then I'm in search of new machine shop. I just snug them down, no torque.
  15. JWMcCrary

    Lets See Your Floor Shifter Set Ups

    Custom console for C4 shifter, Art Carr - Winters
  16. JWMcCrary

    Opinions on New dash layout

    I have 2 sets of seatbelts. I have a 3 point (shoulder strap) that I use when driving on the hwy. The strap across my shoulder drives me nuts on he trail so several years ago I added 3 inch lap belts and use that when on the trail.
  17. JWMcCrary

    Opinions on New dash layout

    Thank You, that's what I want and like the best. It just puzzles why I don't see any others like that..... And yes, you have been known to torpedo my budget for a project, lol. But not this time....I hope.
  18. JWMcCrary

    Opinions on New dash layout

    Planning a refresh on my 73 this spring, part of that includes reworking the dash using a new dash overlay. I'm tired of all the aluminum look (since 2005) and plan on having it all Forest Green, which is the color of the Bronco and everything else black. I have a new ididit steering column that...
  19. JWMcCrary

    Is this "normal"

    Not normal, or shouldn’t be normal anyway. Needs to come apart and be cleaned up. Replace the axle seals in the housing, I expect that’s where the water got in, or the vent, needs to be checked out. Seal it all back up and put fresh gear oil. Use a gasket or RTV, both work, I usually use a...
  20. JWMcCrary

    Switching headlight , windshield to rocker switch

    I'm planning to do this as well. The bright for your headlight would still use the dimmer switch on the floor. You just need a switch that's Off-On-On and a relay(s), the park lights would need to be on in both positions. Same for the wipers and the heater. I won't have a heater so I only need...
Top