• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. trailpsycho

    9in info.

    For all the trouble you are having/going through. It would be easiest to remove the ends and replace them with the big bearing ends. I believe BCB sells them. It shouldnt be terribly difficult to do. Definitely something you should be able to have done in one day up in Grand Junction (make...
  2. trailpsycho

    5.0 Air Intake Hose and Filter

    I tapped my Explorer lower intake. I also run the AEM Dry-FLow air filter. Its been a good piece.
  3. trailpsycho

    New Rock Skis

    If you "cap" the ends they will be MUCH stronger. Good luck and have fun. John
  4. trailpsycho

    Small Block Ford Questions 302/5.0

    Just try to find the lowest mileage motor possible. If possible, run a compression test. It doesnt matter if it was an auto or manual. If you you are going to run a manual, go to NAPA and ask for a flywheel for a 92 F150 manual tranny with a 5.0....that will get you the correct Pioneer...
  5. trailpsycho

    Rock ski price list

    I have the Rocker Wrappers from Tom @ The Bronco Ranch. They are a two piece design. They are nice. I have no idea on shipping, as I picked them up when we did a parts swap at one time. I have also seen the Duffs version that I think are very similar to the BCB skis. The 1/4 Duff slides...
  6. trailpsycho

    BC Tie Rod Conversion "Under"

    Chris, I have all the stuff to do a Chevy TRE setup over or under. I bought the reamer, drill bits and taps to make future setups. They are at Ron's and we could build them there or at Dan's. Give me a shout. As well, I ran the 3way adjustable setup from Bronco Parts of Sacramento (now...
  7. trailpsycho

    "The Beast" - Explorer 5.0/ZF/NP203/NP205 is ALIVE!

    Tito, looks great. It also does look alot like a school bus, especially with the black bumpers, flares and tree-tamers mounted. Keep it up. Its gonna be a blast. But looks really nice.
  8. trailpsycho

    Compressor options for ARB's?

    This is the same one I run for my tires. Its a decent product., but its fairly slow. I won a Shitty-built model that is similar at a run at the Badlands last fall. I had to rewire it, replace the switch and now the hose has an obstruction...stay away from Smittybuilt. It now sits on the...
  9. trailpsycho

    cage options???

    Welcome to Classic! Lots of very cool cages out there. Mike @ Extreme Custom Fab is a good guy and makes a great product...so dont think I am trying to sway you...his kits are a great value. However, if you arent familiar with whats out there and whats been done, you might try doing a search...
  10. trailpsycho

    Totally Stainless

    I bought the TS complete indented hex kit for my build. I must say that it is the nicest SS hardware I have seen, used. Thick washers, very good quality. Its not cheap. Ultimately, if you are not doing a 'stock' rebuild, there is alot of hardware that you will not use...at least for the...
  11. trailpsycho

    Compressor options for ARB's?

    I have a small compressor to air up my tires when I need to, its not fast, but it does the job...the Costco one that everyone was hyper about a couple of three or 4 yrs ago. As far as for actuating my ARBs, I picked up a small regulator at Lowes designed for use with the 9 and 20 OZ CO2 tanks...
  12. trailpsycho

    Body Panel adhesive

    A few more pics. If you can, removal of the dash would allow you to seal from the bottom all of the rivets. Since I was already roadworthy and wired, I did not. I have seen a leak here and there. I am unsure if it is coming from the riveted face of the cowl--which I doubt since it was so...
  13. trailpsycho

    Body Panel adhesive

    Powers back, so here are some pics. I dont have any pics mid application...simply b/c the adhesive cures fairly quickly. What you cant see...after applying a thick coat to the windshield frame, I used some thin SS washers (which received a coat of adhesive on both sides) between the hinge and...
  14. trailpsycho

    Body Panel adhesive

    Bax- I did exactly this last jan/feb. The BPA was 3M. I was unsure, so I used 1/4 SS rivets to act as insurance. I will chack my Pc and see if I can find the pics. Our power is out so no router. Good luck. John
  15. trailpsycho

    Bronco frame question!

    As Dusty said, 2X4 3/16" rectangular tube is a great fit for the front, but for the rear, the dimensions are different. The opening is a little larger and the 2X4 doesnt fit well. As well, apart from an insert, you should consider plating the frame-horns to strengthen the attachment points...
  16. trailpsycho

    Duff Long Arms

    Yes, they do. This gets debated every once in a while here, but after a before and after for many people its difficult to say this one thing made the difference...I bet someone has done it piece by piece to see where they get the most bang for the buck, but most people tend to add the long...
  17. trailpsycho

    Help with rear cutouts

    No doubt! Ditch the flares you have, get some gorilla warflares and open it to the front by 2 inches, add some 33"s and you should be set. Problem fixed.
  18. trailpsycho

    H-boost squeal when pushing brake pedal

    You still have air in the system. As well, you should double verify the hoses are plumbed correctly. Correct bleed procedure is to turn the wheels ( with wheels off the ground) while engine is off a dozen or so times. Then remove the coil wire(so the engine cant start) and turn the engine...
  19. trailpsycho

    TIG welding door frame posts

    A buddy of mine TIGed them 360...this was2 years after the frame off. Sucked, but loose rattling door frames on an otherwise "frame-off" project...well thats just too much for a man to take. Make sure you remove the glass, vent window frames, trim and other door stuff prior to him beginning...
  20. trailpsycho

    TIG welding door frame posts

    A buddy of mine TIGed them 360...this was2 years after the frame off. Sucked, but loose rattling door frames on an otherwise "frame-off" project...well thats just too much for a man to take. My paint shop reshot the doors, no problem.
Top