• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. trailpsycho

    Difference in Leaf Springs?

    The new WH springs look decent. I always recommend the Deavers. American made, good quality with a fairly soft-responsive ride and great flex when you need it.
  2. trailpsycho

    Shock length

    I have 5.5" SL--with the cage arms and shock mounts, so while I am close to the same configuration...I dont know that its a good comparison. I am running Deaver springs which may compress more or less than what you run. However, the 12" Fox are more similar dimensionally (have a longer body)...
  3. trailpsycho

    Engine Recommendations?

    I would agree that the 300 I6 with EFI would be a cool option, BUT, even though this a frame up build...there is some facrication required and, if I remember correctly, some firewall mods needed due its length. The most sense is a 5.0 EFI motor. Good power, reasonable economy, excellent...
  4. trailpsycho

    I might have paid to much so what do you think it worth

    You did fine. However, as mentioned above...its none of the things you proclaim it to be since it is a hodge-podge...and it would likely cost alot more than you could ever recoupe to return it to either roadster or "Navy" condition. Its worth what you paid for it, but not alot more than...
  5. trailpsycho

    bilstein shocks versus other brands questions

    I recently installed some Fox reservoir shocks with their compression dampeners (think 8 position dial to tune the shock--like on the Rancho 9000, but of the qulaity tha only Bilstein, Fox and King offer). They are pretty sweet. I will need to send them back to have them re-valved as they are...
  6. trailpsycho

    NV3550 mated to a J-Shift Dana 20-which twin sticks

    I would contact JBFab. Good folks!
  7. trailpsycho

    Installing tranny/transfer case as one

    Ive done the NV4500/D20 as a combo before using a tranny jack. Its tough to get aligned, esp. since there really isnt a "correct clutch tool" for this setup...tape on the end of the Dodge/chevy tool gets you really close, but its hard to get back in. Borrow or rent a tranny jack if you...
  8. trailpsycho

    Looking to Buy My First Bronco! :D

    Those each have betwee $2500-3000 in wheels and tires alone. Look like 16 or 17 " wheels and 33-35 " tires. ~4.5-5.5" of total lift on each. The dark blue one has had custom modified front (I am pretty sure) and rear (definitely sure) fenders...very $$ if you cant do ti yourself. The...
  9. trailpsycho

    Soft top / Family Cage Clearance Question

    NO reason why a pin setup couldnt/wouldnt replace the bolt-locking washer combo thats standard with the softies...however, it may or may not rattle more since you cant tighten it up a little. My advice would be to find someone in your area to take some measurements from. I am driving mine...
  10. trailpsycho

    Looking to Buy My First Bronco! :D

    The for sale section here is about as good of a place to look as any... As far as telling you what you want or need to know. Look in the FAQ section. I believe there is also a "what to look for when buying" thread. If not in the FAQ, there are well over a dozen in the archives that can be...
  11. trailpsycho

    JBG Longtube Header Install

    Surprisingly, the passnegers go in with a little bit of wiggling from the top. I was able to get the drivers side in by removing the main bolt in the motor mount and lifting the motor a little by the oil pan...trying to remember if they dropped in from the top or wriggled in from the bottom...
  12. trailpsycho

    Broncorama 2011

    There are usually 4-5 Broncos for sale. Last year I think there were 4 EBs and I saw at least one later model. There may have been more that I wasnt paying attention to...and there may have been more eariler in the day...may have been more partial Broncos earlier as well. As far as...
  13. trailpsycho

    4R70W swap ??

    Someone can correct me if I am wrong, but I believe alot of folks have used "dampener dude" or "dampener dudes"....maybe its "damper dudes". Either way,the Explorer front dress is a shorter dress and it requires the correct balancer to achieve alignment. I am not aware if there is an off-the...
  14. trailpsycho

    Where to find NV3550

    I would NEVER run one that hasnt been rebuilt.
  15. trailpsycho

    4R70W swap ??

    Not sure if you were clear on this, but you will have to use the Exploder timing cover on out to run the Expolder front dress. As well, the engine will not have the correct imbalance for the Exploder flexplate/flywheel. I believe you can reuse the one for your current C4. As you may...
  16. trailpsycho

    Gears, Trans, and tire size combo?

    As VW said, its more important about what style of tranny you want to rock. IMO, if you want an auto, then I would go with a 4R70W with the Baumann Optishift controller. If a manual tranny is your thing, then a NV3550 would probably be sufficient, but I prefer a beefier trans like the NV4500...
  17. trailpsycho

    Hydroboost losing "boost"

    Definitely go with dual returns, that way any potential fluid dynamics problems, as far as return of fluid, is a non-issue. Good luck.
  18. trailpsycho

    Drive line angle

    As mentioned, just try to get the tranny as level as possible. You definitely dont want the end too low...as it will make the front driveshaft angle even more funky if the back of the tranny sits low. Good luck.
  19. trailpsycho

    Performance upgrades to my bronco

    Forget the Flowmasters. They are really loud. In a previous incarnation, I had long tube heades, large SS Delta Flow 50s...it sounded bad-ass but very loud. I switched to a 2-into-1 with a super-sized Maganflow SS muffler and its about right...its still loud...hell, its a Bronco with a safari...
  20. trailpsycho

    Looking for Bilstein shocks

    FOX offers a compression dampening adjuster on their reservoir shocks. The base shock is about $10 more than the Bilstein 7100 and then the CD adjuster add-on costs an extra $75. It appeared to me that this offered the best of all worlds. I could dial it softer or firmer depending on driving...
Top