• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. B

    For Those Of You Who Have A Working Coyote Bronco

    That's basically the thing there are people building them but like most bronco projects they are not finished. There are very few on the road and the ones that are were likely bought not built by the owner so they have little interest in coming to a bronco site where we build broncos ourselves...
  2. B

    AZ Stampede

    I'm not a club member to far away to really participate. But I've been going to the stampede for many years. So Ive gotten to know quite a few of the club members over the years. Don't know all the ins and outs but from what I gathered last year there were some differences in opinion on how the...
  3. B

    Watch out for this stuff when buying!

    While I feel sorry for the guy. Its like they say theres always a sucker out there. That's what these sellers count on. Why people spend big money on vehicles they don't get to see first hand is beyond me. I've looked at vehicles for out of state buyers before and I detail all issues I notice...
  4. B

    WH headers?

    to bad you cant get the header at least bolted down to the head good. If you could Id suggest to try and pry the header flange off the tranny with a block of wood.
  5. B

    For Those Of You Who Have A Working Coyote Bronco

    Reliability is or should be better with a factory type setup. But that doesn't mean it will be. There's plenty of issues with the coyote engines that could pop up. But its relative 10 people may have no issues but yours is that one and that's no matter if you go factory or aftermarket. Build...
  6. B

    Stroppe Bronco vs. IRA

    Id take the apple stock hands down. While it may be close to topping out its not likely to drop either if it gains another 20% this year that's a big jump the dividend may not seem that good but its not really about dividends its about growth the dividend is a bonus. You wont make money off...
  7. B

    AZ Stampede

    Yes it has been a little quiet. Think there maybe a little fall out still. Not sure if the organizers spend any time here or not. But there FB page has had talk of it. I'm going but neither if my broncos are gonna make this one.
  8. B

    Bronco hut headers

    I've rarely had issues with even the old fiber gaskets but they do tend to blow out or leak but its not hard to change them out. As was said either aluminum or copper will last longer.
  9. B

    Which Paint Type

    But some people do clear coat single stage as well. I'm not a big fan of clear coat either even factory clear coat. The Arizona sun tears it up. Old single stage paint may fade but you can buff it back to looking like new. Ive had good luck with TCP global in the past I will use them again if I...
  10. B

    Upgrade for my ford 9 inch with Trac lock

    If your gonna buy axles and redo the trac loc then you may as well go with 31 spline. The currie 28 spline axles are stronger than stock but still probably weaker than stock 31spline axles. so aftermarket 31 spline should give you a decent boost in strength. Just throwing this out there but my...
  11. B

    302 Clevor question

    There is info out there. Just not a lot and understandably so. The clevor was hot before the internet was and even when it was hot it was still not a everyday thing.. I'm not sure on your combo but it may work. Although I think that when 302boss pistons are used most people also go with 302...
  12. B

    AX15 vs NV3550

    Lots of the jeep crowd are going with the AX when the NV fails. The AX is said to be a little stronger. But for most purposes they are basically the same. The gearing difference is minimal and would be barely noticeable unless you just want a slightly lower first gear. Id go with the ax but...
  13. B

    Upgrade for my ford 9 inch with Trac lock

    I'm with Skiddy and the others that suggest 31spline axles.. Sooner or later those 28 spline axles will be the item that is going to break. 35in tires are the key factor. I'm partial to the trac loc myself but they are limited even in 31 spline form. For the most part they just don't hold up...
  14. B

    Power Steering Box

    Might check with the vendors to see if they are all like that. If so you could always source your own box that hasn't been modified yet. Another alternative may be to build a cage so to speak that mounts over the holes effectively covering and strengthening the box and mounting. I know some...
  15. B

    Exhaust Fumes

    Side exit is best. Smelly exhaust is a sign of a rich mixture might help to do some serious tuning but keep in mind its still best to route the exhaust out the side as even with a well tuned engine you may not smell the fumes but they will still be entering the as they did before when you could...
  16. B

    Vin / Title registration with Frame not matching?!

    If he has a title that matches a frame then I would use that frame for the bronco he wants to get on the road. He can get a VIN tag that matches the frame from marti auto. Then everything will match so no issue other than smog. On the other hand if he wants to use the frame that came with his...
  17. B

    Massive Oil Consumption

    I don't see much to fear. He has been chasing his tail for 2 years had the heads off and rebuilt and no change. Everything points to rings. At least to me. Especially with the latest revelation of pistons rocking in the bores. Why keep messing around it needs to be torn down and inspected. In...
  18. B

    Massive Oil Consumption

    quite odd to burn that much oil in a short amount of time and not foul out any spark plugs. Along that line Id say your running way to lean by looks of the plugs and if its burning that much oil. But Id say something is wrong with the rings. I think I would pull the engine and tear it down. You...
  19. B

    Transmission Swap Dilemma.

    It appears you can use the AOD kit on AODE or 4R70W. Advance adapters sells a kit allow the AOD shaft to be used in the later tranny's kit is only $30. While the 4R70W is probably the way to go. The added cost of the electronics kinda bites maybe the "idea" of controlling shift points works for...
  20. B

    Explorer 5.0 to Ford T18 Flywheel ?

    Welcome. Basically yes that's the parts you need. Just make sure the flywheel you get accepts a 11in clutch. Most flywheels should accept either the 11in or 10.5in clutch but Id just make double sure before pulling the trigger on parts.
Top