Search results

Is there a way I can properly adjust the side vent window to seal tighter against the weatherstripping. Currently, I have a high pitched whistling from the vent to window seal and it is driving me crazy while driving on the freeway. My vent widow handles are worn down and I will replace them...

I recently installed new Dennis Carpenter weatherstripping. But, now I have to slam my door in order to close it. Is there an adjustment I can make so I can fully close my door without shaking the entire bronco? Thanks, Ed

There should be two snap rings that are attached to the upper portion of your steering shaft, which prevent it from sliding down. There is also a clamp, which is attached to the lower portion of your upper steering shaft, directly below your lower bearing. Make sure it is snug against the...

I also tore mine a while back. However, I could not find the exact replacement at the autoparts stores. I found only generic boots that were not the proper shape or size. Ended up using my old one and glued it back together, but it was not torn too bad.

I had my '74 box upgraded to 3.25 turns, by WTO, approx. 7 months ago. The steering is very responsive and fun to drive. WTO performed a quality rebuild! I am able to drive 80 mph on the freeway without any vibration or wondering with this setup: WTO rebuilt box, flaming river lower steering...

Hi Pedro, I just recently had my carb rebuilt by a local store in San Diego. For about a year I have had problems with my carb running either to lean or too rich. I also had absolutely no throttle response and horrible gas mileage. Therefore, I finally decided to take my carb to San Diego...

There was a member, who lives in San Diego, who was offering his welding services for a fee. I just found the original post! http://classicbroncos.com/forums/showthread.php?t=91149&highlight=san+diego Good luck! Ed

Thanks for your help Broncnaz. I actually just returned from a local and reputable Carb shop in San Diego and they performed an excellent job rebuilding my carb. Apparently, I had problems with clogged jets and deteriorated gaskets, which resulted in serious gas leakage and wasting. Wow, what...

Thanks for all the responses! Yeah, I took a closer look at the carb and discovered that one of my jets is gushing fuel out of it. Definitely time for a rebuild. However, since I have never done it before and I need to get my daily driver back on the road ASAP, I will probably purchase the...

Sorry for the delayed response. I think a deposit of some sort was dislodged from my gas tank and stopped up my carb. It is running extremely poorly, but does better at higher RPM's. Any additionally advice will be much appreciated. Thanks, Ed

My stock 2100 recently stopped functioning properly on my daily driver. I currently do not have time to learn and rebuild my carb. I do not know which carb to purchase at Kragen (partsamerica). My two options are: 1. Holley II Remanufactured Carburetor; F-2 (Part #645340); 3 Month Limited...

Awesome vid Ben!

904Bronco, There are tons of used wipers and arms off of mid 80's cherokees at the pick-n-pull yard in San Jose. Another option if your blades do not come in tomorrow.

Bronco n' VWs, I used the Dorman Wiper Arms (rear window), Part Number: 42873. Just a side note, I had to shorten my arm 3.5" to fit properly on my windshield, using the 13" blades.

Hi Doug, I recently completed my Cherokee wiper conversion with no problems at all. I ordered the arms and blades online at www.Partsamerica.com. The wiper blades I purchased are the Bosch Wiper Blade: 13" Micro Edge Excel; part #40913 for $9.99 each. Hope this helps. Ed

I will be out of town during that weekend Ben, but definitely anytime after the 6th. Have a great Holiday! Ed

I just finished installing my Grant anti-theft system and it works great! However, I have a problem regarding the spacing between the adapter hub/housing and steering column. At first, there was not enough room between the two, so I loosened the lower column bearing clamp and lengthened my WH...

lol..... scsm76!

scsm76, Having a guard dog is awesome, but your dogs looks too friendly to me, considering it is a lab (man's best friend) ;D lol, jk. If I left my dog in my Bronco, she would more likely lick them, rather than attack them. Great picture of your dog!

I have a stock 1974 with upgraded steering and brakes. I am extremely happy it drives straight and stops now. My body is absolutely stock, with the exception of a Stroppe standard roll bar in it. Sometimes I run in to a dilemma regarding whether or not I should cut the rear fenders to add...