Community
Buy / Sell
James Duff Rust Bullet Sexton Offroad
Bronco Tech
Ford Bronco Parts - Classic Vintage Early Bronco Parts
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. 68rustbucket

    Making Bent Gent Look Easy!

    There was a tube buggy that was hung up there and had to get winched out right before I tried it. It's all about having a good spotter. JT has spotted a couple other stock wheel base early broncos through that obstacle already. Thanks to Scoop for taking the video
  2. 68rustbucket

    Making Bent Gent Look Easy!

    It doesn't work for me either, Scoop. But I've seen it ;)
  3. 68rustbucket

    Duff 4 link diy

    subscribed
  4. 68rustbucket

    1972-73 owners-mind your P's and Q's

    R189 mfg, date 01/73
  5. 68rustbucket

    How well-designed is the Duff 4 link?

    5001, are you running full width or stock EB rear axle?
  6. 68rustbucket

    How well-designed is the Duff 4 link?

    Thanks for the info! Looks good. Where did you get the adjustable coil buckets?
  7. 68rustbucket

    How well-designed is the Duff 4 link?

    Thanks Mike!
  8. 68rustbucket

    How well-designed is the Duff 4 link?

    The rear crossmember will need to be cut and moved. It isn't an issue for me about fuel tank interference, I'm running propane tanks in the bed. I'm not familiar on how to do 4 link calculator, but just wondering if links would need to be lengthened.
  9. 68rustbucket

    How well-designed is the Duff 4 link?

    Mike, What if I want to move my rear axle back 6"? Could I do this with your 4 link? Would the geometry still be right? If not, what would need to be done to correct it?
  10. 68rustbucket

    Build off road facility

    Where in Comanche co?
  11. 68rustbucket

    Hood Clearance w/ MSD ignition

    I have stock motor mounts on my '68 w/289, 2v intake, and MSD ready to Run dizzy. No hood clearance issues
  12. 68rustbucket

    Mosquito Pass w/Stroppe

    Is your Stroppe carbureted? If so, what jets are you running? Is it 2v?
  13. 68rustbucket

    Factory power steering box ?

    yes. I just looked at mine
  14. 68rustbucket

    Dana 44 ball joint/knuckle breakage...how many have broken one and tire size...

    Broken u-joint led to ears breaking off inner shaft, that turned into ripping back of knuckle. 37" Krawlers
  15. 68rustbucket

    inner axle yoke bent

    Kudos to Wild Horses! They'll be sending me a replacement axle as soon as back ordered batch shows up. Thanks for the info Paul!
  16. 68rustbucket

    inner axle yoke bent

    These are actually for a set of spares I carry on the trail. I'm currently running D44 chromos with ctm ujoints. The bfg red label krawlers tires have broken a couple hubs. Then a driver outer and inner stub, 760 ujoint on back up set, and f150 knuckle at our Lebc round up last month.
  17. 68rustbucket

    inner axle yoke bent

    There's no needle bearings in Yukon super joints. Cap has brass bushing
  18. 68rustbucket

    inner axle yoke bent

    Thanks Paul, I'll give you a call
  19. 68rustbucket

    inner axle yoke bent

    Bought new set of D44 Chromo axles w/Yukon superjoints from WH. Install of ujoints went ok til last piece. Inner long side ended up with 1 bent yoke, so couldn't get inner C clip into groove. Removed caps and long axle stub, Just need to straighten 1 slightly bent ear. Anybody ever have to fix a...
  20. 68rustbucket

    Tilt automatic column

    Just buy the WH complete steering column setup. I tried to do the cheaper way, but it cost the same or a little more. There's always some small parts and pieces you'll need that run the price up on just buying the column seperately
Top