Search results

Mine used to come out there till the rocks smashed them up. Got tired of prying them back open so I just did a dump in front of the rear axle. Exhaust was not bad to my surprise.

Whats up Steve! You need to cruise up to the bash this weekend!

hmmm... may try that with the vac line this wknd. I just don't like to take the bowls off the carb and worry I'll rip the gasket and usually don't carry a spare.

I've got a 4 barrel 640 Holley Truck Avenger carb. I always have big plans to re-jet it when I get up there. The air is thinner so you need smaller jets or it will run rich. Usually I am too busy shootin the shit, BBQing and drinking beers to be bothered. I just let it run rich, the idle...

I used to be open/open on 33's and made it through without a strap or body damage. I think it was Mark "sure, you'll be fine" that got me on it. One of my favorite trails now! I think the hardest part is the little gate keeper section in the beginning. Little easier running it in reverse...

Mail him some cash and cruise up Matt! Going to be a Bash for the record books!

I'll be there Thursday night. We are going to cook a whole hog on Saturday at the BBQ! Oink Oink! :o Looking forward to seeing everyone! Kirk

I remember mine was very tight but it fit.

Shoot, that's a cool shifter!

bumpity bumpity bump bump

Sorry don't have pics. I would wait. Measure twice, cut once.

That's frustrating! I forget what ZF I have... The wide ratio one. It bolted right up.

for much less swap a 5.0 and overdrive trans from an explorer.

bump - still got these if anyone needs them PM me

Decided I wanted to make my own and went with the areoquip brand (rated to 2500) going to build an extra hose to keep in the spare box.

ok, thats what I thought, saw this product from Russell http://www.summitracing.com/parts/rus-671570

What do you use if anything to seal the threads on an AN type fitting?

This is the route I am thinking about going. Wondering if I can find them online. Just need two 2' hoses with 6-AN fittings and 90 degree bends on each end. Maybe a third for a spare.

This is what burst on me. Russell brand. Teflon 2500 PSI (not powerflex). I'm looking for a more durable hose.

yes that is correct