Search results

Yes... Should have mentioned it failed at the hose not the fitting. Crack/hole under the braided line. Fittings are strong, hoses are junk for high pressure application IMHO. Have worked fine for low pressure applications. The issue could have been dirt/dust between the braided and hose but...

Don't use the build it yourself braided Russell lines, mine burst, loss of steering made me hit a rock and it killed my 4x4x2 box. 8 hours and a $420 recovery tow later I was back at camp (broken and 150 miles from home). That crappy line cost me over $1200. But yes you can fix them on the...

Exploded a braided line PS hose and want to replace it with the best hose out there. What should I use? I am running hydroboost. Is it true the only high pressure line is going to be between the pump and the box? Thanks, Kirk

Who made the box?

Bad ass old winch like the one in pics. Complete less motor. I hear the new ones bolt right up. Kinda want to keep it but I need to reduce the number or projects in garage and would like to get it to someone who will use it. Kirk

Sorry no shipping.

Old School Bellview Winch. Needs new motor otherwise complete w/ cable

Full length headers for 351 Cleveland. Fit 4V and 2V heads. Good used condition. Come pick them up.

That looks like it! Cheeper on this site but no garuntee like the parts stores give you at a higher initial cost (130ish). Still have not ruled out the Champion radiator. Its a direct bolt in and just found out they have a lifetime guarantee. Still need to price them out w/ shipping. Can't...

good to know.... must just be the wrong picture that's not the right radiator. That is a top bottom res for one. Looks much wider too.

here it is... $70! http://www.partsgeek.com/catalog/1991/ford/explorer/cooling_system/radiator.html or with lifetime at autozone...

this is not it. this is for a ford ranger it says Part #: CU897 SKU: 9813069 This part fits your 1994 FORD RANGER PICKUP It looks like the gen 1 auto but the outlet is straight (and of course there is no trans cooler)

how did it work with the angled radiator outlet?

Wanted to switch to an electric fan but that Explorer fan is an option too. Anyone have a part number on the volvo fan? wonder what they cost new?

Thanks Ransil! This is the one I am looking for however this is for the auto trans and has the angled output the manual one that has a straight tube coming out the bottom. When I search the site I don't get an option for manual vs auto? Would rather spend 100 and get one of these that comes...

this the right one? https://www.pepboys.com/product/details/9489448/00894/1992/FORD/EXPLORER/0/V6-245%2520%25204.0L%2520OHV 25% off coupon code PEP25CHEER

Looking to upgrade from stock three core radiator. It's starting to leak from te center of the crossover tubes. Debating weather to go Champion aluminum or explorer 4.0. I am going to be using an explorer serp set up and would like to run a taurus fan. Any thoughts?

New heads are not an option and these seem to be about right where I want them. Don't think I will need the thicker gasket. Just need to confirm the relief volume, deck height and chamber volume. From what I have ready they are 64-65 cc.

X2... seems like a good one. Better than the one I was using.

Ok, thought it may have been a typo. I see on summit you can get gaskets 4.01, 4.03, 4.1 etc. I have always bought the same size gasket as the bore. Maybe it does not matter, I'm new to motor building. What compression would you run on a mild build with iron heads and pump gas... think CA is...