Search results

TrailDawg, Check you light switch on the dash. I have a 93 F150 and had the same problem. Was talking to a Ford mechanic and he said that this was a common problem. When I checked my switch there was a big burnt spot on the back of the switch :-X. Replace both plug and switch it yours is bad.

I would not put the sand in the cage for the Bronco. Depending of the size of the cage is how much it would raise the center of gravity and the added weight that would compress the suspension. Neither of which are good in a Bronco but on tractors we are always looking for easy ways to add weight...

Here is how 67HalfCab did his. http://web.triton.net/d/davy/rearfenders.htm

Thanks, I now see that the 302 is more popular due to availability. But a 351FI in the Bronco will be sooooooo sweet. Now to start looking at the rest of the diver train.

I will be doing this soon and the best information I have found and keep forgetting about is on site <=====under web map, Over 500 Bronco links There are some good articles and a how too guids.

When I get around to doing mine I will get a few fenders from the junkyard a practice with different tools to see what gives me the best cut and control with me doing it. I have all the tools but want to get confidence in one before I go at the Bronco. Chip

I was wondering why I have not seen post about putting an injected 351 in an EB. I have a 77 that is real clean that will get a 302 FI for a daily driver. I also am picking up a 73 the wife suggested I make into my dream machine. I was looking at a 351 and ran across a 92 Bronco with a 351FI and...

I work at an Engineering company that has done a little bit of work out there. Thanks for the heads up on the location of the Y. I get close to there when I go out to Motorola. As soon as I get the brakes working better, I will make the trip down. My girls always like a good reason to go to...

I work in Round Rock and have wanted to go but where is the Y at? I do not know Austin that well.

I have seen PVC used with no problem as long as it does not get hot or have something rubbing on it. If you have a PVC tank or lines with above 85 PSI in it get a hole or weak spot it goes up like a bomb with shrapnel flying all over the place. I saw a 6” dia by 4’ long SHC80 PVC tank take out...

I live in the Temple area and have been seeing a few more around here. My wife says it is because I am looking harder since I found this board. ;D