- Joined
- Nov 12, 2013
- Messages
- 243
I'm helping a friend convert his 302 from a mustang front dress to the explorer. We have changed everything over but can't get it to start (ran fine before). I wired the alternator the same as my 4G but can't get it to fire. He does have an MSD 6AL box whereas I do not, but I don't believe it should matter regarding this issue. I have fire at the coil but nothing at the plug wire (good way to wake you up!!). I know there was an extra plug on the 2G alternator, although I'm not sure what it was for (two wires going into one, looks like a ground wire ).
The plug on the 4 G alternator is wired the same as mine (yellow back to Alt post, white/black not used, and green to "I" post on the solenoid along with the Gn/Red from the wiring harness. Any thoughts on what it could be is appreciated!!
The plug on the 4 G alternator is wired the same as mine (yellow back to Alt post, white/black not used, and green to "I" post on the solenoid along with the Gn/Red from the wiring harness. Any thoughts on what it could be is appreciated!!