naneumranch
Sr. Member
- Joined
- Sep 17, 2011
- Messages
- 405
Posting for a friend
Selling my ford 331 stroker parts. Got all the parts and then never started the project I wanted to do. Now I just need the cash and am wanting to sell everything to one buyer. All parts are new and never used. Here's the list of the main parts. There are a couple boxes of random parts too.
-'91 5.0 block. Bored .030 over, mains have been align honed. Has ARP studded mains.
-Scat steel stroker crank and rods with 10.5:1 Keith Black FORGED pistons
-Trick Flow Twisted Wedge 170cc aluminum heads. 2.02-1.60
-Trick Flow stage 2 hyd roller cam .286/.294 duration .542/.563 lift. Lobe sep. 112
-Comp Cams Ultra-Gold aluminum full roller rockers 1.6 ratio 3/8" stud mount
-Edelbrock RPM Air-gap intake
-Demon 650 carb (speed demon)
-MSD billet distributor
-MSD 6AL ignition and Blaster 2 coil
-Flow Cooler water pump
-Melling oil pump
-Trick Flow balancer
-All ARP fasteners and studs
-K&N air filter
-BBK and March underdrive pulleys
-lots of other parts and pieces
$3,500 takes it all
This would make a great little thumper for your hot rod or street/strip car
Please message me for more details
Selling my ford 331 stroker parts. Got all the parts and then never started the project I wanted to do. Now I just need the cash and am wanting to sell everything to one buyer. All parts are new and never used. Here's the list of the main parts. There are a couple boxes of random parts too.
-'91 5.0 block. Bored .030 over, mains have been align honed. Has ARP studded mains.
-Scat steel stroker crank and rods with 10.5:1 Keith Black FORGED pistons
-Trick Flow Twisted Wedge 170cc aluminum heads. 2.02-1.60
-Trick Flow stage 2 hyd roller cam .286/.294 duration .542/.563 lift. Lobe sep. 112
-Comp Cams Ultra-Gold aluminum full roller rockers 1.6 ratio 3/8" stud mount
-Edelbrock RPM Air-gap intake
-Demon 650 carb (speed demon)
-MSD billet distributor
-MSD 6AL ignition and Blaster 2 coil
-Flow Cooler water pump
-Melling oil pump
-Trick Flow balancer
-All ARP fasteners and studs
-K&N air filter
-BBK and March underdrive pulleys
-lots of other parts and pieces
$3,500 takes it all
This would make a great little thumper for your hot rod or street/strip car
Please message me for more details
