• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

'84 F-150 engine

azslim

Jr. Member
Joined
Jun 28, 2007
Messages
78
Loc.
Wilhoit,Az.
I just picked up a '84 F-150 with a 5.7 H.O. 4V engine. I'm thinking about replacing my 170 c.i. six in my '66 Bronco. Any big deal? The truck is a Canadian build 4X4 w/ automatic. Also has twin shocks on the front.
Thanks
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
The engine is a good fit for a Bronco with minor mods (1" body lift, new engine mount towers, etc...) but does take a little more work to get it in place of a 6-cyl engine.

Things like larger radiators, maybe a different trans adapter (not sure, but others will know) and stuff like that are normal for this swap.

Is that '84 a simple carbureted engine still? Or does it use one of those interim electronically controlled carburetors with a locked-out distributor and timing control computer under the seat?

Have fun.

Paul
 
OP
OP
azslim

azslim

Jr. Member
Joined
Jun 28, 2007
Messages
78
Loc.
Wilhoit,Az.
It has an Edelbrock performer four-barrel, I didn't see any weird computer stuff. I bought a '85 Mercury Full sized four-door at the same time and was thinking about the 302, but it has FI. It only has 58,000 original miles and is in nice shape, so I may just clean it up and sell it and use the money for the 351 swap.
 
Top