9" gasket

[SteveL]

Is there a decent re-usable gasket for the 3rd member that works well? I just used rtv on the 66 and its holding fine but I'd feel better with a gasket when I put the arb in the 72.

 

[BanditBronco]

lube locker, expensive but the only way to go ever since I used the first one I always check to see if they make one before I seal up anything now.

 

[SteveL]

I saw summit had the line locker listed. Looks like I'll go that route. Thanks

 

[74 Bronco Billy]

Ruff stuff specualties has them too, work well.

Sent from my SAMSUNG-SM-G930A using Tapatalk

 

[WILDHORSES]

Here's our LL selection. Been using them for a while. They work great.
https://www.wildhorses4x4.com/category/s?keyword=lube

Jim

 

[B RON CO]

Hi, silicone is fine with no gasket. Good luck

 

[bigmuddy]

I like the great stuff gasket maker, works great for a number of seals.

 

[gick70]

I used a gasket,leaked! No gasket now,no leaks! Right stuff!!

 

[SteveL]

Just did the 66 with a paper fell pro and it leaked. Redid it with just rtv and ok so far. That's what got me thinking better gasket and no rtv mess.

 

[68ford]

All eaton and Spicer axles on diesel trucks(basically a 9in but 5 times bigger) all use sealant, never a gasket. I figure there's a reason why.

 

[SteveL]

I'm also thinking easier to pull apart and reseal out somewhere and no waiting for rtv to set up before running it.

 

[Action]

I used right stuff on mine no gasket....no leaks and I don't plan on taking it apart.....lol
Jack

 

[bax]

The Lube locker gaskets are good ones. You can re-use them.

 

[DirtDonk]

Always gaskets and silicone here. Never a leak.
Sounds like I should be crossing my fingers from now on thought!

But I have both an o-ring type, and some other style gasket for my next go-round.

Paul